Ads
related to: how to find tire diameter from width
Search results
Results From The WOW.Com Content Network
The tire diameter is given for High Flotation tires and omitted from Numeric tires. 2-digit number: The diameter of the tire in inches. x: Separator character. 3- or 4-digit number: The section width (cross-section) of the tire in inches. If the tire diameter is not given, section widths ending in zero (e.g., 7.00 or 10.50) indicate the aspect ...
Such tires are designated with their nominal section width and their nominal rim diameter, separated by a hyphen (-). Both are measured in millimeters. A typical example of a tire marking according to ISO 5775-1 is: 32-597 inflate to 400 kPa. The first number (nominal section width) is essentially the width of the inflated tire (minus any tread).
Modern road tires have several measurements associated with their size as specified by tire codes like 225/70R14. The first number in the code (e.g., "225") represents the nominal tire width in millimeters. This is followed by the aspect ratio (e.g.,"70"), which is the height of the sidewall expressed as a percentage of the nominal tire width.
Changing to a wider tire requires reducing the aspect ratio (the second number in the sequence of numbers that describes the tire's size). Since the aspect ratio is a percentage which is used to calculate the height of the tire's sidewall, if follows that is a larger number is used for the width, a smaller number must be substituted if the ...
29er rims have an interior diameter of 622 millimetres (24.5 in) [1] and the average 29″ mountain bike tire is (in ISO notation) 59-622 – corresponding to an outside diameter of about 29.15 inches (740 mm). The typical 26″ MTB tire has a rim diameter of 559 millimetres (22.0 in) and an outside tire diameter of about 26 inches (660 mm). [2]
As with four-wheeled vehicles, tyres for motorcycle have a tyre code, which describes a tyre's width, height/width aspect ratio, wheel diameter, load index and speed rating. [16] The most common are: 3 digit number: The "nominal section width" of the tyre in millimetres; the widest point from both outer edges.