Search results
Results From The WOW.Com Content Network
An anodic protection system includes an external power supply connected to auxiliary cathodes and controlled by a feedback signal from one or more reference electrodes. [3] Careful design and control is required when using anodic protection for several reasons, including excessive current when passivation is lost or unstable, leading to ...
Quench polish quench (QPQ) is a specialized type of nitrocarburizing case hardening that increases corrosion resistance. It is sometimes known by the brand name of Tufftride, Tenifer or Melonite. [1] Three steps are involved: nitrocarburize ("quench"), polish, and post-oxidize ("quench"). [2]
A voltage regulator module (VRM), sometimes called processor power module (PPM), is a buck converter that provides the microprocessor and chipset the appropriate supply voltage, converting +3.3 V, +5 V or +12 V to lower voltages required by the devices, allowing devices with different supply voltages be mounted on the same motherboard.
Failed aluminium electrolytic capacitors with open vents in the top of the can, and visible dried electrolyte residue (reddish-brown color) The capacitor plague was a problem related to a higher-than-expected failure rate of non-solid aluminium electrolytic capacitors between 1999 and 2007, especially those from some Taiwanese manufacturers, [1] [2] due to faulty electrolyte composition that ...
The power supply is then taken away and the anodes are simply attached to the steel as a galvanic system. More powered phases can be administered if needed. Like galvanic systems, corrosion rate monitoring from polarization tests and half-cell potential mapping can be used to measure corrosion. Polarization is not the goal for the life of the ...
Corrosion monitoring is the use of a corrator (corrosion meter) or set of methods [1] and equipment to provide offline or online information about corrosion rate expressed in mpy (mill per year). [ 2 ] - for better care and to take or improve preventive measures to combat and protect against corrosion .
Battery: A 3.6 V 1/2AA lithium battery, which must be present in order for basic settings to persist between power cycles, is located on the logic board. Macintosh SE machines which have sat for a long time have experienced battery corrosion and leakage, resulting in a damaged case and logic board. Some SE models feature a board-mounted battery ...
The standoff provides a margin of space between the motherboard and the case to keep the multiple solder points below from grounding and short-circuiting. Usually, the standoff has a #6-32 UNC male thread on one end which screws into a threaded hole in the case or motherboard backplate and a #6-32 UNC female thread in the other end which ...