Ad
related to: fpd-link™ iii serial adapter
Search results
Results From The WOW.Com Content Network
Basic LVDS circuit. FPD-Link was the first large-scale application of the low-voltage differential signaling (LVDS) standard. National Semiconductor immediately provided interoperability specifications for the FPD-Link technology in order to promote it as a free and open standard, and thus other IC suppliers were able to copy it.
The original FPD-Link designed for 18-bit RGB video has 3 parallel data pairs and a clock pair, so this is a parallel communication scheme. However, each of the 3 pairs transfers 7 serialized bits during each clock cycle. So the FPD-Link parallel pairs are carrying serialized data, but use a parallel clock to recover and synchronize the data.
OpenLDI is based on the FPD-Link specification, which was the de facto standard for transferring graphics and video data through notebook computer hinges since the late 1990s. Both OpenLDI and FPD-Link use low-voltage differential signaling (LVDS) as the physical layer signaling, and the three terms have mistakenly been used synonymously. (FPD ...
Serial digital interface (SDI) and HD-SDI. CoaXPress; 75 Ω for video signal (SDI and CoaXPress) on, for example, RG59 and RG6. 50 Ω for data link, like Ethernet on RG58. 93 Ω on RG62. 50 Ω (white/bottom row) and 75 Ω C connectors (red/top row) C connector (Concelman connector) General Radio 874 connectors GR connector (General Radio connector)
Serial FPDP also recommends the use of one of the following link widths: [2] x1; x4; x8; x12 (5 Gbit/s and up) x24 (5 Gbit/s and up) x48 (10 Gbit/s and up) Serial FPDP can operate over long distances, up to 10 kilometres (6.2 mi), using optical fiber cables, or shorter distances over copper cables.
Data Carrier Detect (DCD) or Carrier Detect (CD) is a control signal present inside an RS-232 serial communications cable that goes between a computer and another device, such as a modem. This signal is a simple "high/low" status bit that is sent from a data communications equipment (DCE) to a data terminal equipment (DTE), i.e., from the modem ...
A USB-to-serial adapter or simply USB adapter is a type of protocol converter that is used for converting USB data signals to and from serial communications standards (serial ports). Most commonly the USB data signals are converted to either RS-232 , RS-485 , RS-422 , or TTL-level UART serial data.
LVDS, defined by the ANSI/TIA/EIA-644-A standard, is a differential signaling system that can run at high speed. LVDS works in serial data transmission. As the main applications had 18 bits color depth in early adoption of FPD-Link, a 7-bit wide differential cable pair for each of 3 channels with another channel for clock became used.