Ads
related to: difference between full synthetic and blended time value formula
Search results
Results From The WOW.Com Content Network
Pyrolysis oil, sometimes also known as biocrude or bio-oil, is a synthetic fuel with few industrial application and under investigation as substitute for petroleum.It is obtained by heating dried biomass without oxygen in a reactor at a temperature of about 500 °C (900 °F) with subsequent cooling, separation from the aqueous phase and other processes.
Synthetic paraffinic kerosene (SPK) refers to any non-petroleum-based fuel designed to replace kerosene jet fuel, which is often, but not always, made from biomass. Biofuels are biomass -derived fuels from plants, animals, or waste; depending on which type of biomass is used, they could lower CO 2 emissions by 20–98% compared to conventional ...
The differences between Jet A and Jet A-1 are twofold. The primary difference is the lower freezing point of Jet A-1 fuel: [7] Jet A's is −40 °C (−40 °F) Jet A-1's is −47 °C (−53 °F) The other difference is the mandatory addition of an antistatic additive to Jet A-1 fuel.
However, like methane, R-410A has a global warming potential (GWP) that is appreciably worse than CO 2 (GWP = 1) for the time it persists. R-410A is a mixture of 50% HFC-32 and 50% HFC-125. HFC-32 has a 4.9 year lifetime and a 100-year GWP of 675 and HFC-125 has a 29-year lifetime and a 100-year GWP of 3500.
Ethanol fuel has a "gasoline gallon equivalency" (GGE) value of 1.5, i.e. to replace the energy of 1 volume of gasoline, 1.5 times the volume of ethanol is needed. [4] [5] Ethanol-blended fuel is widely used in Brazil, the United States, and Europe (see also Ethanol fuel by country). [2]
LPG has a typical specific calorific value of 46.1 MJ/kg compared with 42.5 MJ/kg for fuel oil and 43.5 MJ/kg for premium grade petrol (gasoline). [14] However, its energy density per volume unit of 26 MJ/L is lower than either that of petrol or fuel oil, as its relative density is lower (about 0.5–0.58 kg/L, compared to 0.71–0.77 kg/L for ...
Syngas, or synthesis gas, is a mixture of hydrogen and carbon monoxide, [1] in various ratios. The gas often contains some carbon dioxide and methane.It is principally used for producing ammonia or methanol.
Its calorific value is approximately 9% lower than that of standard diesel, impacting fuel efficiency. Biodiesel production has evolved significantly, with early methods including the direct use of vegetable oils, to more advanced processes like transesterification, which reduces viscosity and improves combustion properties.