Ads
related to: difference between 240mm and 120mm aio tv screen shot camera recorder download
Search results
Results From The WOW.Com Content Network
The camera uses a 1/2-inch colour Newvicon tube with a consumer-grade lens barrel giving a 6 times zoom with macro, normal focussing down to 4 feet (1.2 metres), and a minimum illumination of 10 lux. The microphone and folding viewfinder are physically built-in with no external cables, though headphones and an external microphone can used.
Samsung NX500 - Same 28 MP APS-C sensor as NXI but 4K video is not downsampled from 6.5K so less details and more noise than the NX1 - with this 2.4× crop factor the kit lens become a 38–120mm f8.5–13.4 equivalent for depth of field; 15 min max recording time limit
The USB video device class (also USB video class or UVC) is a USB device class that describes devices capable of streaming video like webcams, digital camcorders, transcoders, analog video converters and still-image cameras.
A key component was a single camera-recorder unit, eliminating a cable between the camera and recorder and increasing the camera operator's freedom. The Betacam used the same cassette format (0.5 inches or 1.3 centimetres tape) as the Betamax, but with a different, incompatible recording format. It became standard equipment for broadcast news. [4]
A PC-based DVR's architecture is a classical personal computer with video capture cards designed to capture video images. An embedded type DVR is specifically designed as a digital video recorder with its operating system and application software contained in firmware or read-only memory .
The high quality of DV images, especially when compared to Video8 and Hi8 which were vulnerable to an unacceptable number of video dropouts and "hits", prompted the acceptance by mainstream broadcasters of material shot on DV. The low costs of DV equipment and their ease of use put such cameras in the hands of a new breed of videojournalists.
The camera section held the lens and camera tube pre-amplifiers and other necessary electronics, and was connected to a large diameter multicore cable to the remainder of the camera electronics, usually mounted in a separate room in the studio, or a remote truck. The camera head could not generate a video picture signal on its own.
At the system level this function is typically performed by a dedicated video capture device. Such devices typically employ integrated circuit video decoders to convert incoming video signals to a standard digital video format, and additional circuitry to convey the resulting digital video to local storage or to circuitry outside the video ...