Ads
related to: 12 pin plug problems with 2
Search results
Results From The WOW.Com Content Network
The image of the 7 and 12 pin flat plugs are from the cable entry view (and possibly the images of the round connectors too). Please see reference [2] (VSB1 section 14) for front image. Reference [1] Narva wiring diagrams also have the diagrams cable entry view. If you want the front view images in colour see [3]
13-pin trailer connector of Jaeger type. (screw terminals - trailer PLUG). see photograph typical rear of 13 pin trailer Plug showing terminals with pin numbers. Physical design of the standard ISO 11446 [2] [3] but also called Jaeger-connector from the company that developed it.
Pin A is for activation of so-called Blackout Mode. It turns off all the lights except convoy lighting if it is active. The lighting inside the vehicle shall also be extinguished if it is not specifically shaded. Pin C is for Convoy Lamps, which is the special convoy lighting, corresponding to the tail lights, to be used while driving in the dark.
The plug for SAE J560 is physically identical to the connector ISO 1185. The difference is that J560 indicates that the voltage must be 12 V and that wire areas shall be larger due to the higher currents needed when using 12 V compared to 24 V. Some of the pins in the connector have also a slightly different function.
Therefore, there is no compatibility between these earthed 3-pin plugs. The two types of plug systems also differ in that IEC 60906-1 plugs (both 2 pin unearthed and 3 pin earthed) always have been defined to have partially sleeved line and neutral pins, while the Swiss type 11 (unearthed) and type 12 (earthed) plugs formerly were allowed to be ...
Keying by omitting a pin is also used in 8- (subminiature), 10-, and 12-pin tubes (a variant 10-pin form, "Noval+1", is basically a nine-pin socket with an added center contact). As with loctal tubes, the pins of miniature tube are stiff wires protruding through the bottom of the glass envelope which plug directly into the socket.
Multicon [1] Feder and Multicon WeSt (Welt Standard) connectors are precursors to ISO 11446 in a design that is intended to be compatible with ISO 1724.This means that if a towing vehicle has an outlet of this type it should be able to connect a trailer with a standard 7-pin or 5-pin connector according to ISO 1724, provided that the trailer coupling follows the standard and that the trailer ...
The connection may be removable (as for portable equipment), require a tool for assembly and removal, or serve as a permanent electrical joint between two points. [2] An adapter can be used to join dissimilar connectors. Most electrical connectors have a gender – i.e. the male component, called a plug, connects to the female component, or socket.