Ads
related to: 1 2 inch chain links
Search results
Results From The WOW.Com Content Network
Because the spacing from link to link on a worn chain is longer than the 1 ⁄ 2 inch (12.7 mm) specification, those links will not precisely fit the spaces between teeth on the sprockets. This can result in increased wear on the sprockets, and possibly "chain skip" on derailleur drivetrains, in which pedalling tension causes the chain to slide ...
The chain (abbreviated ch) is a unit of length equal to 66 feet (22 yards), used in both the US customary and Imperial unit systems. It is subdivided into 100 links. [1] [2] There are 10 chains in a furlong, and 80 chains in one statute mile. [2]
The first digits indicate the pitch of the chain in eighths of an inch, with the last digit being 0 for standard chain, 1 for lightweight chain, and 5 for bushed chain with no rollers. Thus, a chain with half-inch pitch is a No. 40 while a No. 160 sprocket has teeth spaced 2 inches apart, etc. Metric pitches are expressed in sixteenths of an ...
A Gunter's chain showing the individual links. The link (usually abbreviated as "l.", "li." or "lnk."), sometimes called a Gunter’s link, is a unit of length formerly used in many English-speaking countries. In US customary units modern definition, the link is exactly 66 ⁄ 100 of a US survey foot, [1] or exactly 7.92 inches or 20.1168 cm.
The 66-foot (20.1 m) chain is divided into 100 links, usually marked off into groups of 10 by brass rings or tags which simplify intermediate measurement. Each link is thus 7.92 inches (201 mm) long. A quarter chain, or 25 links, measures 16 feet 6 inches (5.03 m) and thus measures a rod (or pole).
A master link or quick-release link is a roller chain accessory that allows convenient connection and disconnection of a chain without the need for a chain tool. [1] It acts as a set of the chain's outer plates, so joining two sets of the chain's inner plate ends. Such master links may or may not be re-usable. [2] A chain tool is nonetheless ...