Ads
related to: portable oxygen cylinder regulators
Search results
Results From The WOW.Com Content Network
The pin index safety system uses a face seal between the cylinder valve and the associated yoke clamp. There are two holes in specific positions on the cylinder valve body below the outlet port , in positions associated with the gas mixture, which prevent connection of the cylinder to a yoke or pressure regulator with a mis-matched set of pins.
Portable oxygen concentrator used with bottle humidifier. POCs operate on the same principle as a home concentrator, pressure swing adsorption. [6] The basic set up of a POC is a miniaturized air compressor, a cylinder filled containing the sieve, a pressure equalizing reservoir and valves and tubes.
A portable administration set will comprise a portable high-pressure oxygen cylinder containing sufficient gas for the expected treatment, with an oxygen service cylinder valve, an oxygen compatible first stage regulator with pressure gauge, intermediate pressure hose, and demand valve with mouthpiece.
As the first cylinder reaches near pure oxygen (there are small amounts of argon, CO 2, water vapour, radon, and other minor atmospheric components) in the first half-cycle, a valve opens and the oxygen-enriched gas flows to the pressure-equalizing reservoir, which connects to the patient's oxygen hose. At the end of the first half of the cycle ...
Pin-indexed Oxygen Regulator for portable D-Cylinder, usually carried in an ambulance's resuscitation kit. Automated versions of the BVM system, known as a resuscitator or pneupac can also deliver measured and timed doses of oxygen directly to people through a facemask or airway.
An open circuit SCBA typically has three main components: a high-pressure gas storage cylinder, (e.g., 2,216 to 5,500 psi (15,280 to 37,920 kPa), about 150 to 374 atmospheres), a pressure regulator, and a respiratory interface, which may be a mouthpiece, half mask or full-face mask, assembled and mounted on a framed carrying harness. [2]