When.com Web Search

  1. Ads

    related to: gas pump clicking off while filling tires with air after nitrogen removal

Search results

  1. Results From The WOW.Com Content Network
  2. Sparging (chemistry) - Wikipedia

    en.wikipedia.org/wiki/Sparging_(chemistry)

    Sparging introduces a gas that has little or no partial pressure of the gas(es) to be removed, and increases the area of the gas-liquid interface, which encourages some of the dissolved gas(es) to diffuse into the sparging gas before the sparging gas escapes from the liquid. Many sparging processes, such as solvent removal, use air as the ...

  3. Nitrogen generator - Wikipedia

    en.wikipedia.org/wiki/Nitrogen_generator

    There are many tire and automotive shops with nitrogen generators to fill tires. The advantage of using nitrogen is that the tank is dry. Often a compressed air tank will have water in it that comes from atmospheric water vapor condensing in the tank after leaving the air compressor. Nitrogen maintains a more stable pressure when heated and ...

  4. Inerting system - Wikipedia

    en.wikipedia.org/wiki/Inerting_system

    After being fully filled, and during use, there is a space above the fuel, called the ullage, that contains evaporated fuel mixed with air, which contains the oxygen necessary for combustion. Under the right conditions this mixture can ignite. An inerting system replaces the air with a gas that cannot support combustion, such as nitrogen. [1] [2]

  5. Degassing - Wikipedia

    en.wikipedia.org/wiki/Degassing

    If the wine is bottled quickly after fermentation, it is important to degas the wine before bottling. Wineries can skip the degassing process if they age their wines prior to bottling. Storing the wines in steel or oak barrels for months and sometimes years allows gases to be released from the wine and escape into the air through air-locks.

  6. Gasoline pump - Wikipedia

    en.wikipedia.org/wiki/Gasoline_pump

    A gasoline pump or fuel dispenser is a machine at a filling station that is used to pump gasoline (petrol), diesel, or other types of liquid fuel into vehicles. Gasoline pumps are also known as bowsers or petrol bowsers (in Australia and South Africa), [2] [3] petrol pumps (in Commonwealth countries), or gas pumps (in North America).

  7. Cold trap - Wikipedia

    en.wikipedia.org/wiki/Cold_trap

    [3] [4] Reversing this, connecting the down tube to the source of vacuum, places the inlet of the vacuum directly above the condensate, increasing the chances of vapour phase condensate moving up the (uncooled) down tube (towards the pump) or, should the trap begin to fill to an appreciable volume, liquid phase condensate being pulled into the ...

  8. Cascade filling system - Wikipedia

    en.wikipedia.org/wiki/Cascade_filling_system

    A cascade filling system is a high-pressure gas cylinder storage system that is used for the refilling of smaller compressed gas cylinders. [ 1 ] [ 2 ] In some applications, each of the large cylinders is filled by a compressor , otherwise they may be filled remotely and replaced when the pressure is too low for effective transfer.

  9. Pressure swing adsorption - Wikipedia

    en.wikipedia.org/wiki/Pressure_swing_adsorption

    VSA typically draws the gas through the separation process with a vacuum. For oxygen and nitrogen VSA systems, the vacuum is typically generated by a blower. Hybrid vacuum pressure swing adsorption (VPSA) systems also exist. VPSA systems apply pressurized gas to the separation process and also apply a vacuum to the purge gas.