Ad
related to: dry etching
Search results
Results From The WOW.Com Content Network
Dry etching refers to the removal of material, typically a masked pattern of semiconductor material, by exposing the material to a bombardment of ions (usually a plasma of reactive gases such as fluorocarbons, oxygen, chlorine, boron trichloride; sometimes with addition of nitrogen, argon, helium and other gases) that dislodge portions of the material from the exposed surface.
Etching tanks used to perform Piranha, hydrofluoric acid or RCA clean on 4-inch wafer batches at LAAS technological facility in Toulouse, France. Etching is used in microfabrication to chemically remove layers from the surface of a wafer during manufacturing. Etching is a critically important process module in fabrication, and every wafer ...
Reactive-ion etching (RIE) is an etching technology used in microfabrication. RIE is a type of dry etching which has different characteristics than wet etching . RIE uses chemically reactive plasma to remove material deposited on wafers .
Deep reactive-ion etching (DRIE) is a special subclass of reactive-ion etching (RIE). It enables highly anisotropic etch process used to create deep penetration, steep-sided holes and trenches in wafers /substrates, typically with high aspect ratios .
The dry etch is then performed so that structured etching is achieved. After the process, the remaining photoresist has to be removed. This is also done in a special plasma etcher, called an asher. [14] Dry etching allows a reproducible, uniform etching of all materials used in silicon and III-V semiconductor technology. By using inductively ...
In etching, a liquid ("wet") or plasma ("dry") chemical agent removes the uppermost layer of the substrate in the areas that are not protected by photoresist. In semiconductor fabrication, dry etching techniques are generally used, as they can be made anisotropic, in order to avoid significant undercutting of the photoresist pattern. This is ...
Etching and deposition each account for 28% of semiconductor cost, totaling 56%, with lithography next at 22%. As Bleeker explained, lithography transfers chip design; but it is etching that ...
Etching is the removal of some portion of the thin film or substrate. The substrate is exposed to an etching (such as an acid or plasma) which chemically or physically attacks the film until it is removed. Etching techniques include: Dry etching (plasma etching) such as reactive-ion etching (RIE) or deep reactive-ion etching (DRIE)