Ads
related to: shurflo vacuum pump setup instructions
Search results
Results From The WOW.Com Content Network
A turbomolecular pump is a type of vacuum pump, superficially similar to a turbopump, used to obtain and maintain high vacuum. [ 1 ] [ 2 ] These pumps work on the principle that gas molecules can be given momentum in a desired direction by repeated collision with a moving solid surface.
A partial vacuum may be generated by increasing the volume of a container. To continue evacuating a chamber indefinitely without requiring infinite growth, a compartment of the vacuum can be repeatedly closed off, exhausted, and expanded again. This is the principle behind a positive displacement pump, for example the manual water pump. Inside ...
The inert-gas line is vented through an oil bubbler, while solvent vapors and gaseous reaction products are prevented from contaminating the vacuum pump by a liquid-nitrogen or dry-ice/acetone cold trap. Special stopcocks or Teflon taps allow vacuum or inert gas to be selected without the need for placing the sample on a separate line. [3]
Diagram of the vacuum filtration apparatus. By flowing through the aspirator, water will suck out the air contained in the vacuum flask and the Büchner flask.There is therefore a difference in pressure between the exterior and the interior of the flasks : the contents of the Büchner funnel are sucked towards the vacuum flask.
The term "roughing pump" derives from the vacuum range it works in, "rough vacuum", above 1x10 −3 torr (0.1 Pa). Pumps that operate in the high vacuum ranges typically don't operate, or only operate inefficiently, at atmospheric pressures , whereas pumps that work efficiently at atmospheric pressure usually cannot produce a vacuum lower than ...
Ultra-high vacuum (often spelled ultrahigh in American English, UHV) is the vacuum regime characterised by pressures lower than about 1 × 10 −6 pascals (1.0 × 10 −8 mbar; 7.5 × 10 −9 Torr). UHV conditions are created by pumping the gas out of a UHV chamber.