Ads
related to: cm^2 to m^2 calculator
Search results
Results From The WOW.Com Content Network
Pd = H 2 × 377 and Pd = E 2 ÷ 377 where Pd is the power density in watts per square meter (one W/m 2 is equal to 0.1 mW/cm 2), H 2 = the square of the value of the magnetic field in amperes RMS squared per meter squared, E 2 = the square of the value of the electric field in volts RMS squared per meter squared. [6]
Irradiance. In radiometry, irradiance is the radiant flux received by a surface per unit area. The SI unit of irradiance is the watt per square metre (W⋅m −2). The CGS unit erg per square centimetre per second (erg⋅cm −2 ⋅s −1) is often used in astronomy. Irradiance is often called intensity, but this term is avoided in radiometry ...
Radiant intensity is used to characterize the emission of radiation by an antenna: [2], = (), where E e is the irradiance of the antenna;; r is the distance from the antenna.; Unlike power density, radiant intensity does not depend on distance: because radiant intensity is defined as the power through a solid angle, the decreasing power density over distance due to the inverse-square law is ...
The temperature Stefan obtained was a median value of previous ones, 1950 °C and the absolute thermodynamic one 2200 K. As 2.57 4 = 43.5, it follows from the law that the temperature of the Sun is 2.57 times greater than the temperature of the lamella, so Stefan got a value of 5430 °C or 5700 K. This was the first sensible value for the ...
cd/m 2. In SI base units: cd · m −2. The candela per square metre (symbol: cd/m2) is the unit of luminance in the International System of Units (SI). The unit is based on the candela, the SI unit of luminous intensity, and the square metre, the SI unit of area. The nit (symbol: nt) is a non-SI name also used for this unit (1 nt = 1 cd/m 2). [1]
In electromagnetism, current density is the amount of charge per unit time that flows through a unit area of a chosen cross section. [1] The current density vector is defined as a vector whose magnitude is the electric current per cross-sectional area at a given point in space, its direction being that of the motion of the positive charges at this point.
Dose area product (DAP) is a quantity used in assessing the radiation risk from diagnostic X-ray radiography examinations and interventional procedures, like angiography.It is defined as the absorbed dose multiplied by the area irradiated, expressed in gray-centimetres squared (Gy·cm 2 [1] – sometimes the prefixed units dGy·cm 2, mGy·cm 2 or cGy·cm 2 are also used). [2]
To calculate stroke volume, multiply the cross-sectional area of 3.14 cm 2 by the LVOT VTI 24 cm. This gives an LV stroke volume of 3.14 * 24 = 75.40 cc. Divide the LV stroke volume, 75.40 cc by the Aortic Valve VTI, 50 cm and this gives an aortic valve area of 75.40 / 50 = 1.51 cm 2. The weakest aspect of this calculation is the variability in ...