Search results
Results From The WOW.Com Content Network
In the elliptical orbit in between the speed varies from 10.15 km/s at the perigee to 1.61 km/s at the apogee. Therefore the Δv for the first burn is 10.15 − 7.73 = 2.42 km/s, for the second burn 3.07 − 1.61 = 1.46 km/s, and for both together 3.88 km/s.
The maximum speed is 56.7 mph (91.2 km/h) and the average speed is 19.6 mph (31.5 km/h). The cycle has two phases: a "cold start" phase of 505 seconds over a projected distance of 3.59 mi at 25.6 mph average speed, and a "transient phase" of 864 seconds, for a total duration of 1369 seconds.
The original Naismith's rule from 1892 says that one should allow one hour per three miles on the map and an additional hour per 2000 feet of ascent. [1] [4] It is included in the last sentence of his report from a trip. [1] [8] Today it is formulated in many ways. Naismith's 1 h / 3 mi + 1 h / 2000 ft can be replaced by:
Radar is a system that uses radio waves to determine the distance (), direction (azimuth and elevation angles), and radial velocity of objects relative to the site. It is a radiodetermination method [1] used to detect and track aircraft, ships, spacecraft, guided missiles, motor vehicles, map weather formations, and terrain.
For example: An acceleration of 1 g equates to a rate of change in velocity of approximately 35 km/h (22 mph) for each second that elapses. Therefore, if an automobile is capable of braking at 1 g and is traveling at 35 km/h, it can brake to a standstill in one second and the driver will experience a deceleration of 1 g. The automobile ...
The formula is dimensionless, describing a ratio true for all units of measure applied uniformly across the formula. If the numerical value a {\displaystyle \mathbf {a} } is measured in meters per second squared, then the numerical values v {\displaystyle v\,} will be in meters per second, r {\displaystyle r\,} in meters, and ω {\displaystyle ...
Airspeed is commonly given in knots (kn). Since 2010, the International Civil Aviation Organization (ICAO) recommends using kilometers per hour (km/h) for airspeed (and meters per second for wind speed on runways), but allows using the de facto standard of knots, and has no set date on when to stop.
It expresses the distance in feet (ft) traveled or displaced, divided by the time in seconds (s). [2] The corresponding unit in the International System of Units (SI) is the meter per second . Abbreviations include ft/s , fps , and the scientific notation ft s −1 .