Search results
Results From The WOW.Com Content Network
Part of a ladder diagram, including contacts and coils, compares, timers and monostable multivibrators. Ladder logic is widely used to program PLCs, where sequential control of a process or manufacturing operation is required. Ladder logic is useful for simple but critical control systems or for reworking old hardwired relay circuits. As ...
This is the core of the SCADA system, gathering data on the process and sending control commands to the field connected devices. It refers to the computer and software responsible for communicating with the field connection controllers, which are RTUs and PLCs, and includes the HMI software running on operator workstations.
IEC 61131-3 is the third part (of 10) of the international standard IEC 61131 for programmable logic controllers. It was first published in December 1993 [1] by the IEC; the current (third) edition was published in February 2013. [2] Part 3 of IEC 61131 deals with basic software architecture and programming languages of the control program ...
A feedback control loop is directly controlled by the RTU or PLC, but the SCADA software monitors the overall performance of the loop. For example, a PLC may control the flow of cooling water through part of an industrial process to a set point level, but the SCADA system software will allow operators to change the set points for the flow.
The US V-model, as documented in the 1991 proceedings for the National Council on Systems Engineering (NCOSE; now INCOSE as of 1995), [7] was developed for satellite systems involving hardware, software, and human interaction. The V-model first appeared at Hughes Aircraft circa 1982 as part of the pre-proposal effort for the FAA Advanced ...
Function Block Diagram is one of five languages for logic or control configuration [2] supported by standard IEC 61131-3 for a control system such as a programmable logic controller (PLC) or a Distributed Control System (DCS). The other supported languages are ladder logic, sequential function chart, structured text, and instruction list.
Multivariable Model predictive control (MPC) is a popular technology, usually deployed on a supervisory control computer, that identifies important independent and dependent process variables and the dynamic relationships (models) between them, and often uses matrix-math based control and optimization algorithms to control multiple variables ...
In software development, the V-model [2] represents a development process that may be considered an extension of the waterfall model and is an example of the more general V-model. Instead of moving down linearly, the process steps are bent upwards after the coding phase, to form the typical V shape.