When.com Web Search

  1. Ads

    related to: upstream usb port monitor

Search results

  1. Results From The WOW.Com Content Network
  2. USB hub - Wikipedia

    en.wikipedia.org/wiki/USB_hub

    A four-port "long cable" "external box" USB hub A four-port "compact design" USB hub: upstream and downstream ports shown. A USB hub is a device that expands a single Universal Serial Bus (USB) port into several so that there are more ports available to connect devices to a host system, similar to a power strip. All devices connected through a ...

  3. USB4 - Wikipedia

    en.wikipedia.org/wiki/USB4

    The USB4 specification speaks of downstream facing ports (DFP) and upstream facing ports (UFP) rather than host and peripheral ports. Downstream facing ports includes host ports as well as any "outputs" of a USB4 hub, while upstream facing ports include anything that is connectable to a downstream facing port, like the ports of peripherals or ...

  4. USB - Wikipedia

    en.wikipedia.org/wiki/USB

    Standard USB hub ports can provide from the typical 500 mA/2.5 W of current, only 100 mA from non-hub ports. USB 3.0 and USB On-The-Go supply 1.8 A/9.0 W (for dedicated battery charging, 1.5 A/7.5 W full bandwidth or 900 mA/4.5 W high bandwidth), while FireWire can in theory supply up to 60 watts of power, although 10 to 20 watts is more typical.

  5. USB-C - Wikipedia

    en.wikipedia.org/wiki/USB-C

    USB-C, or USB Type-C, is a 24-pin connector (not a protocol) that supersedes previous USB connectors and can carry audio, video, and other data, to connect to monitors or external drives. It can also provide and receive power, to power, e.g., a laptop or a mobile phone.

  6. USB communications - Wikipedia

    en.wikipedia.org/wiki/USB_communications

    The written USB 3.0 specification was released by Intel and its partners in August 2008. The first USB 3.0 controller chips were sampled by NEC in May 2009, [4] and the first products using the USB 3.0 specification arrived in January 2010. [5] USB 3.0 connectors are generally backward compatible, but include new wiring and full-duplex operation.

  7. USB hardware - Wikipedia

    en.wikipedia.org/wiki/USB_hardware

    To allow for voltage drops, the voltage at the host port, hub port, and device are specified to be at least 4.75 V, 4.4 V, and 4.35 V respectively by USB 2.0 for low-power devices, [a] but must be at least 4.75 V at all locations for high-power [b] devices (however, high-power devices are required to operate as a low-powered device so that they ...