Search results
Results From The WOW.Com Content Network
The Nissan Xterra is a truck-based compact SUV manufactured and marketed by Nissan from 1999 to 2015 across two generations; the first (1999–2004) sharing a platform and many of its major exterior parts from the front doors forward with the Nissan (D22) Frontier pickup [1] – and the second (2005–2015) sharing the Nissan F-Alpha platform with the Frontier and Pathfinder.
The RL4R01A is a hydraulic controlled unit for its main operation. Shift timing is based on throttle cable position and governor pressure. Its only electronic parts are two solenoids, one for the torque converter clutch, and the other for the manual overdrive cancel switch, but these do not affect the gears control and passing.
The KA20DE was a DOHC 16-valve engine produced from June 1999 through August 2007. It was mainly used in Japanese Domestic Market commercial vehicles. Specifications. Bore × Stroke: 86 mm × 86 mm (3.39 in × 3.39 in)
In the 300ZX, it produced 160 hp (119 kW) and 173 lb⋅ft (235 N⋅m) of torque. In April 1987 the "W" series VG30 was released, adding 5 horsepower but leaving torque unchanged. In 1989, the Maxima received the 160 hp (119 kW) rating, but also used a variable intake plenum improving torque to 182 lb⋅ft (247 N⋅m) at 3200 rpm.
This engine features the VP44 rotary injection pump and is turbocharged and intercooled. In the Presage/Bassara it is fitted sideways with a variable vane turbocharger (Garrett GT1749V) and torque is limited to approximately 28.6 kg⋅m (280 N⋅m; 207 lb⋅ft) to accommodate the 4 speed automatic gearbox attached.
These engines have been fitted with a factory intercooler and were built from the end of 2002 to 2007. In February 2003, this version received electronic control of injection timing; this increased the torque output to 360 N⋅m (37 kg⋅m; 266 lb⋅ft), [1] equivalent to a BMEP of 1.09 MPa.
MWM engines power the local versions of the Chevrolet Grand Blazer, Nissan Xterra and Ford F250, among others. [citation needed] MWM diesels were also used to power the locally developed Puma trucks. [4] There is common confusion between 2.8L MWM Sprint and the 2.8L Powerstroke.
Peak torque is up 8 pound-feet (11 N⋅m) from the older "DE" engine at 268 lb⋅ft (363 N⋅m) and the torque curve is higher and flatter across most of the rpm range, and especially in the lower rpm range. The VQ35HR was utilized in rear-wheel-drive platforms while the VQ35DE continued to power Nissan's front-wheel-drive vehicles.