Search results
Results From The WOW.Com Content Network
Production ended in 1967, four years after the introduction of the 600 Grosser Mercedes and the 6.3 L (386.4 cu in) M100 V-8. The various versions of the engine (M186 – M199) produced from 115–240 bhp (86–179 kW) as compression ratios rose and the number of carburetors multiplied or were replaced with fuel-injection.
For example, if the static compression ratio is 10:1, and the dynamic compression ratio is 7.5:1, a useful value for cylinder pressure would be 7.5 1.3 × atmospheric pressure, or 13.7 bar (relative to atmospheric pressure). The two corrections for dynamic compression ratio affect cylinder pressure in opposite directions, but not in equal strength.
The LE2 is the direct-injection 1.4 L turbocharged variant of the SGE, with a 74 mm × 81.3 mm (2.91 in × 3.20 in) bore and stroke for a total capacity of 1,399 cc (1.4 L). Compression ratio is 10.0:1 and the engine can run on regular grade gasoline. The LE2 is also paired with a start-stop system in some vehicles.
The 3.2 L; 193.8 cu in (3,175 cc) LA3 or Y32SE is a complete redesign of the L81 for the Cadillac CTS and Opel Omega B. [citation needed] It had fixed (non-variable) valve timing, and a variable length intake manifold. The engine has a 87.5 mm × 88 mm (3.44 in × 3.46 in) bore and stroke with a 10.0:1 compression ratio.
The LE9 5.0 L (305 cu in) was a version of the 305 with a four-barrel 650 cu ft/min (18 m 3 /min) carburetor and equipped with electronic spark control (ESC), [33] a 9.2-9.5:1 compression ratio, the LM1 cam and 14010201 casting heads featuring 1.84/1.50" valves, and 53 cc (3.2 cu in) chambers. The engine produced 165 hp (123 kW) at 4,400 and ...
6.5: 6,498 cc (396.5 cu in); bore x stroke: 95.0 mm × 76.4 mm (3.74 in × 3.01 in), compression ratio: 11.8:1 cylinder block & crankcase cast aluminium alloy cylinder heads & valvetrain cast aluminium alloy; four valves per cylinder, 48 valves total, double overhead camshaft aspiration
Displacement is 744 cc, bore and stroke is 95.0 mm x 105.0 mm, compression ratio is 4.8:1, Power output is 15.8 PS at 3500 rpm and torque 38 Nm at 2000 rpm. V-Twin [ edit ]
The LT-1 had an 11.0:1 compression ratio, Holley 780 cu ft/min (22 m 3 /min) 4-barrel carburetor, and solid lifters. For the first year the LT-1 was rated at 370 hp (276 kW) in the Corvette and 360 hp (268 kW) in the Camaro, both of these being brake horsepower (bhp) gross hp ratings. Despite the disparity in these horsepower ratings, there was ...