Search results
Results From The WOW.Com Content Network
In the 220-configuration it produces 143 kW (194 PS; 192 hp) at 3,800 rpm with peak torque of 400 N⋅m (295 lbf⋅ft) at 1,600-2,400 rpm. The engine weight is 168.4 kg (371 lb) (a 17% improvement over the 202.8 kg (447 lb) of the previous 2.1 litres (2,143 cc) OM651). [4] [5] Also, the engine consumes 13% less fuel than its predecessor. It is ...
A ratio of 9.1:1 was standard for 1.7 L engines in passenger cars, while 8.9:1 was standard for 2.0 L engines in passenger cars and was optional for the 2.0 L in the Transit. Power output varied from 73 hp (54.4 kW) for the low-compression 1.7 L engine to 93 hp (69.4 kW) for the high-compression 2.0 L engine, while torque ranged from 100 lb⋅ ...
The 2.5-litre 6G73 is a 24-valve SOHC design with two valves running off a single cam lobe on the exhaust valves using a forked rocker arm and each intake valve actuated with two cam lobes, with a smaller bore than the 3.0L version of the same block. Bore and stroke are 83.5 mm × 76 mm (3.29 in × 2.99 in); it is a 60-degree V6 and weighs ...
The 2.0 litre version was a narrower-bore version of the original 2.3 liter "Lima" four. Bore and stroke are 89.3 and 79.4 mm (3.52 and 3.13 in), respectively, for an overall displacement of 2.0 L; 121.4 cu in (1,990 cc). This engine was installed in the 1983–1988 Ford Rangers and in some Argentinian Ford Taunus. Applications
It is commonly called the "Suitcase" engine, the "Douvrin" nickname being commonly used for the bigger 2.0–2.2-liter J-Type engine, which was also built in Douvrin. The X design was introduced in 1972 with the Peugeot 104. It was an all-aluminium alloy SOHC inline-four design with two valves per cylinder driven by a chain, using petrol as fuel.
The 2.0 L (1,986 cc) 107 kW (145 PS) B19ET was sold in certain markets where engines of over 2–litre displacement were heavily taxed, such as Italy. The engine has the same stroke as all other redblocks, the smaller displacement is the result of a smaller bore at 88.9 mm × 80 mm (3.50 in × 3.15 in).
A severe form of engine flooding occurs when excessive liquid fuel enters the combustion chamber. This reduces the dead volume of the combustion chamber and thus places a heavy load on the starter motor, such that it fails to turn the engine. Damage (due to excessive compression and even dilution of the lubricating oil with fuel) can also occur.
The Family II is a straight-4 piston engine that was originally developed by Opel in the 1970s, debuting in 1981. Available in a wide range of cubic capacities ranging from 1598 to 2405 cc, it simultaneously replaced the Opel CIH and Vauxhall Slant-4 engines, and was GM Europe's core mid-sized powerplant design for much of the 1980s, and provided the basis for the later Ecotec series of ...