Ads
related to: micro usb connector male to women reviews ratings complaints
Search results
Results From The WOW.Com Content Network
Micro-USB connectors, which were announced by the USB-IF on January 4, 2007, [15] [16] have a similar width to Mini-USB, but approximately half the thickness, enabling their integration into thinner portable devices. The Micro-A connector is 6.85 by 1.8 mm (0.270 by 0.071 in) with a maximum overmold boot size of 11.7 by 8.5 mm (0.46 by 0.33 in ...
From article on USB: "The female connector mounted on the host or device is called the receptacle, and the male connector attached to the cable is called the plug.[20](2–5 – 2–6) The official USB specification documents also periodically define the term male to represent the plug, and female to represent the receptacle."
Still, they were quickly replaced by the thinner Micro-USB connectors (Micro-A, Micro-B, Micro-AB). The Type-C connector, also known as USB-C, is not exclusive to USB, is the only current standard for USB, is required for USB4, and is required by other standards, including modern DisplayPort and Thunderbolt.
With the introduction of the USB micro plug, a new plug receptacle called micro-AB was also introduced. It can accept either a micro-A plug or a micro-B plug. Micro-A adapters allow for connection to standard-A plugs, as used on fixed or standard devices. An OTG product must have a single micro-AB receptacle and no other USB receptacles. [5] [6]
The USB connector may be protected by a removable cap or by retracting into the body of the drive, although it is not likely to be damaged if unprotected. Most flash drives use a standard type-A USB connection allowing connection with a port on a personal computer, but drives for other interfaces also exist (e.g. micro-USB and USB-C ports).
This Micro connector shrinks the connector size to something resembling a micro-USB connector, [62] [63] [64] measuring only 5.83 mm × 2.20 mm [65]: 36, fig. 4.1.9.8 For comparison, a micro-USB connector is 6.85 mm × 1.8 mm and a USB type-A connector is 11.5 mm × 4.5 mm. It keeps the standard 19 pins of types A and C, but the pin assignment ...