Search results
Results From The WOW.Com Content Network
It can be used to create/remove Host Protected Area (HPA) (using command SET MAX) and create/remove DCO hidden area (using command DCO MODIFY). It also can do other functions on the DCO. Data Synergy's freeware ATATool utility can be used to detect a DCO from a Windows environment. Recent versions allow a DCO to be created, removed or frozen. [3]
SanDisk, the rightsholders for U3, ask for a 5% royalty from USB flash drive manufacturers who wish to implement the platform on their products. Two drive letters As a work-around to the lack of Auto-Play for Flash drives on older versions of Windows, the U3 software creates two drive letters (one which presents itself as a CD to allow Windows ...
A portable Tableau write-blocker attached to a hard drive Example of a portable disk imaging device A Tableau forensic write blocker A Tableau forensic disk imager A forensic disk controller or hardware write-block device is a specialized type of computer hard disk controller made for the purpose of gaining read-only access to computer hard ...
The command performs the following actions by default on a floppy disk, hard disk drive, solid state , or other magnetic medium (it will not perform these actions on optical media): clearing the FAT entries by changing them to 0x00; clearing the FAT root directory by changing any values found to 0x00 [nb 1] [1] [2] [3]
The position [i.e., setting] of the write protect switch is unknown to the internal circuitry of the card." [121] Some host devices do not support write protection, which is an optional feature of the SD specification, and drivers and devices that do obey a read-only indication may give the user a way to override it. [citation needed]
The chkdsk command on Windows XP. CHKDSK can be run from DOS prompt, Windows Explorer, Windows Command Prompt, Windows PowerShell or Recovery Console. [10] On Windows NT operating systems, CHKDSK can also check the disk surface for bad sectors and mark them (in MS-DOS 6.x and Windows 9x, this is a task done by Microsoft ScanDisk).
The IDENTIFY DEVICE command queries a particular register on the IDE controller to establish the size of a drive. This register however can be changed using the SET MAX ADDRESS ATA command. If the value in the register is set to less than the actual hard drive size then effectively a host protected area is created.
An example of a USB flash drive that supported write protection via a switch is the Transcend JetFlash series. Secure Digital (SD) cards have a write-protect tab on the left side. Extensively, media that, by means of design, can't operate outside from this mode: CD-R , DVD-R , Vinyl records , etc.