Search results
Results From The WOW.Com Content Network
If a rifle scope has mrad markings in the reticle (or there is a spotting scope with an mrad reticle available), the reticle can be used to measure how many mrads to correct a shot even without knowing the shooting distance. For instance, assuming a precise shot fired by an experienced shooter missed the target by 0.8 mrad as seen through an ...
Stadiametric rangefinding, or the stadia method, is a technique of measuring distances with a telescopic instrument. The term stadia comes from a Greek unit of length Stadion (equal to 600 Greek feet, pous) which was the typical length of a sports stadium of the time. Stadiametric rangefinding is used for surveying and in the telescopic sights ...
A telescopic sight, commonly called a scope informally, is an optical sighting device based on a refracting telescope. [1] It is equipped with some form of a referencing pattern – known as a reticle – mounted in a focally appropriate position in its optical system to provide an accurate point of aim.
For example on an AR-type rifle, the mil-spec distance from center of bore to top of rail is 1.211 inches, or approximately 31 mm (1.2 in). The mount height itself, that is the distance from the top of rail to center of scope, varies, but typically lies around 36–38 mm (1.4–1.5 in) (higher and lower mounts are also readily available).
Rifleman's rule. Figure 1: Illustration of the Shooting Scenario. Rifleman's rule is a "rule of thumb" that allows a rifleman to accurately fire a rifle that has been calibrated for horizontal targets at uphill or downhill targets. The rule says that only the horizontal range should be considered when adjusting a sight or performing hold-over ...
Point-blank range is any distance over which a certain firearm or gun can hit a target without the need to elevate the barrel to compensate for bullet drop, i.e. the gun can be pointed horizontally at the target. [1][2] For targets beyond-blank range, the shooter will have to point the barrel of their firearm at a position above the target, and ...
Eye relief. The eye relief of an optical instrument (such as a telescope, a microscope, or binoculars) is the distance from the last surface of an eyepiece within which the user's eye can obtain the full viewing angle. If a viewer's eye is outside this distance, a reduced field of view will be obtained. The calculation of eye relief is complex ...
Unertl Optical Company. Unertl Optical Company, Inc. was a manufacturer of telescopic sights in the United States from 1928 until 2008. They are known for their 10× fixed-power scopes that were used on the Marine Corps ' M40 rifle and made famous by Marine Corps Scout Sniper Carlos Hathcock during the Vietnam War.