Search results
Results From The WOW.Com Content Network
The resolution of 960H depends on whether the equipment is PAL or NTSC based: 960H represents 960 x 576 (PAL) or 960 x 480 (NTSC) pixels. [29] 960H represents an increase in pixels of some 30% over standard D1 resolution, which is 720 x 576 pixels (PAL), or 720 x 480 pixels (NTSC). The increased resolution over D1 comes as a result of a longer ...
1080p progressive scan HDTV, which uses a 16:9 ratio. Some commentators also use display resolution to indicate a range of input formats that the display's input electronics will accept and often include formats greater than the screen's native grid size even though they have to be down-scaled to match the screen's parameters (e.g. accepting a 1920 × 1080 input on a display with a native 1366 ...
Extended Display Identification Data (EDID) and Enhanced EDID (E-EDID) are metadata formats for display devices to describe their capabilities to a video source (e.g., graphics card or set-top box). The data format is defined by a standard published by the Video Electronics Standards Association (VESA).
The graphics display resolution is also known as the display mode or the video mode, although these terms usually include further specifications such as the image refresh rate and the color depth. The resolution itself only indicates the number of distinct pixels that can be displayed on a screen, which affects the sharpness and clarity of the ...
High resolution monochrome mode using a custom non-interlaced monitor with the slightly lower vertical resolution (in order to be an integer multiple of low and medium resolution and thus utilize the same amount of RAM for the framebuffer) allowing a "flicker free" 71.25 Hz refresh rate, higher even than the highest refresh rate provided by VGA.
The resolution of this image is called the display resolution and is determined by the video card of the computer. Flat-panel monitors (and TV sets), e.g. OLED or LCD monitors, or E-ink , also use pixels to display an image, and have a native resolution , and it should (ideally) be matched to the video card resolution.
The native resolution of a liquid crystal display (LCD), liquid crystal on silicon (LCoS) or other flat panel display refers to its single fixed resolution. As an LCD consists of a fixed raster , it cannot change resolution to match the signal being displayed as a cathode-ray tube (CRT) monitor can, meaning that optimal display quality can be ...
The display aspect ratio (DAR) is calculated from the physical width and height of a display, measured each in inch or cm (Display size). The pixel aspect ratio (PAR) is calculated from the width and height of one pixel. The storage aspect ratio (SAR) is calculated from the numbers of pixels in width and height stated in the display resolution.