Ads
related to: magnetic 1 4 socket set sizes
Search results
Results From The WOW.Com Content Network
In Japan, the male sizes are often designated as DTC-20, DTC-27, DTC-40 (discontinued) and DTC-45 corresponding to a respective screw head size of 3.2 mm, 4.6 mm, 6.4 mm and 7.7 mm; with the size of the screw measured across the widest portion of the mating part of the head. The most common sizes in use for consumer electronics are DTC-20 and ...
A 1 ⁄ 4 in (6.35 mm) Xcelite nut driver with a fixed socket. An Easco spinner handle with a detachable 1 ⁄ 4 in (6.35 mm) socket attached. A nutdriver or nut driver is a hand tool for tightening or loosening nuts and bolts .
Pass-through sockets and ratchets are built for 1 ⁄ 4-inch, 3 ⁄ 8-inch and 1 ⁄ 2-inch sets in both SAE and metric sizes. By using a fine tooth ratchet and socket system that allow a pass-through ratchet to be used as a conventional ratchet handle with interchangeable 1 ⁄ 4-inch and 3 ⁄ 8-inch drives some ratchets can be used with ...
Screwdrivers come in a large range of sizes to accommodate various screws—from tiny jeweller's screwdrivers up. A screwdriver that is not the right size and type for the screw may damage the screw in the process of tightening it. Some screwdriver tips are magnetic, so that the screw (unless non-magnetic) remains attached to the screwdriver.
Square head cap screws up to and including 3 ⁄ 4 inch (19.05 mm) have a head 1 ⁄ 8 inch (3.175 mm) larger than the shank; screws larger than 3 ⁄ 4 inch (19.05 mm) have a head 1 ⁄ 4 inch (6.35 mm) larger than the shank. [9] In 1919, Dyke defined them as screws that are threaded all the way to the head. [10] socket screw
Machine screws with different thread diameters Hex key set with metric sizes from 2 mm to 10 mm according to sizes for use with ISO 262 screw sizes (except 3.5 mm for M6 internal set screw) For each size bolt or screw and type of head, there is a corresponding size driver prescribed by various ISO standards, including: