Search results
Results From The WOW.Com Content Network
In computing, BIOS (/ ˈ b aɪ ɒ s,-oʊ s /, BY-oss, -ohss; Basic Input/Output System, also known as the System BIOS, ROM BIOS, BIOS ROM or PC BIOS) is a type of firmware used to provide runtime services for operating systems and programs and to perform hardware initialization during the booting process (power-on startup). [1]
Flashing [6] is a process that involves the overwriting of existing firmware or data, contained in EEPROM or flash memory module present in an electronic device, with new data. [6] This can be done to upgrade a device [ 7 ] or to change the provider of a service associated with the function of the device, such as changing from one mobile phone ...
CD-ROMs are the most common forms of media used, but other media, such as magnetic or paper tape drives, ZIP drives, and more recently USB flash drives can be used. The computer's BIOS must support booting from the device in question. One can make one's own boot disk (typically done to prepare for when the system won't start properly). [2]
Flash memory is an electronic non-volatile computer memory storage medium that can be electrically erased and reprogrammed. The two main types of flash memory, NOR flash and NAND flash, are named for the NOR and NAND logic gates. Both use the same cell design, consisting of floating-gate MOSFETs. They differ at the circuit level depending on ...
Typical POST screen (AMI BIOS) Typical UEFI-compliant BIOS POST screen (Phoenix Technologies BIOS) Summary screen after POST and before booting an operating system (AMI BIOS) A power-on self-test ( POST ) is a process performed by firmware or software routines immediately after a computer or other digital electronic device is powered on.
When a system on a chip (SoC) enters suspend to RAM mode, in many cases, the processor is completely off while the RAM is put in self refresh mode. At resume, the boot ROM is executed again and many boot ROMs are able to detect that the SoC was in suspend to RAM and can resume by jumping directly to the kernel which then takes care of powering on again the peripherals which were off and ...
Unlike the legacy PC BIOS, UEFI does not rely on boot sectors, defining instead a boot manager as part of the UEFI specification. When a computer is powered on, the boot manager checks the boot configuration and, based on its settings, then executes the specified OS boot loader or operating system kernel (usually boot loader [ 62 ] ).
For this reason, later BIOS implementations may use a small portion of BIOS flash ROM as NVRAM, to store setup data. [7] Today's UEFI motherboards use NVRAM to store configuration data (NVRAM is a portion of the UEFI flash ROM), but by many OEMs' design, the UEFI settings are still lost if the CMOS battery fails. [8] [9]