Search results
Results From The WOW.Com Content Network
Check the physical connection - A loose cable or cord can often be the cause of a connection problem. Make sure everything is securely connected to the wall and device. 3. Reboot your modem/router - Sometimes the old "turn it off and on again" approach actually does work! Just wait about five minutes before turning it back on to make sure ...
Wireless LAN (WLAN) channels are frequently accessed using IEEE 802.11 protocols. The 802.11 standard provides several radio frequency bands for use in Wi-Fi communications, each divided into a multitude of channels numbered at 5 MHz spacing (except in the 45/60 GHz band, where they are 0.54/1.08/2.16 GHz apart) between the centre frequency of the channel.
Cable modem termination system. A cable modem termination system (CMTS, also called a CMTS Edge Router) [1] is a piece of equipment, typically located in a cable company's headend or hubsite, which is used to provide data services, such as cable Internet or Voice over IP, to cable subscribers.
The service is sold exclusively to Comcast internet subscribers, and includes access to Xfinity WiFi. [116] [115] Analysts perceived Xfinity Mobile as being a response to AT&T's acquisition of DirecTV, which added the national satellite provider alongside its existing wireline and wireless services, and an increased push towards mobile ...
This Linksys WRT54GS, a combined router and Wi‑Fi access point, operates using the 802.11g standard in the 2.4 GHz ISM band using signalling rates up to 54 Mbit/s. IEEE 802.11 Wi-fi networks are the most widely used wireless networks in the world, connecting devices like laptops (left) to the internet through a wireless router (right).
The FCC's U-NII regulations for 5 GHz wireless operation in the USA. RadioElectronics' article on Wi-Fi / WLAN Channels, Frequencies, Bands & Bandwidths; Air802's article with tables of data on FCC Rules and Regulations which specifies frequencies and channels. Government of India NATIONAL FREQUENCY ALLOCATION PLAN-2011
The carrier frequency is 1800 Hz, meaning that the lower cut off frequency is 1,800 − 1,200/2 = 1,200 Hz, and the upper cutoff frequency is 1,800 + 1,200/2 = 2,400 Hz. A V.34 modem may transmit symbols at a baud rate of 3,420 Bd, and each symbol can carry up to ten bits, resulting in a gross bit rate of 3420 × 10 = 34,200 bit/s.
802.11g is the third modulation standard for wireless LANs.It works in the 2.4 GHz band (like 802.11b) but operates at a maximum raw data rate of 54 Mbit/s.Using the CSMA/CA transmission scheme, 31.4 Mbit/s [9] is the maximum net throughput possible for packets of 1500 bytes in size and a 54 Mbit/s wireless rate (identical to 802.11a core, except for some additional legacy overhead for ...