Ads
related to: bicycle fork bearings
Search results
Results From The WOW.Com Content Network
The length of the fork is usually measured parallel to the steerer tube from the bottom of the lower bearing race to the center of the front wheel axle. [3] A 1996 survey of 13 700c road forks found a maximum length of 374.7 mm and a minimum of 363.5 mm. [citation needed]
By comparison, forks with a threaded steerer tube must be matched with a frame's headset tube length; therefore, bicycle manufacturers need to make or buy a different sized fork for each frame size. Regular allen wrenches can be used to adjust threadless headset bearings.
Head tube: the tube of a bicycle frame that contains the headset; Headset: the bearings that form the interface between the frame and fork steerer tube; Hood: the rubber brake lever covering on bikes with drop style handle bars; Hub: the core of a wheel; contains bearings and, in a traditional wheel, has drilled flanges for attachment of spokes
A bicycle head tube with a partially installed bicycle headset; the locknut has yet to be fitted onto the fork steerer tube. The head tube is the part of a cycle's tubular frame within which the front fork steerer tube is mounted. [1] On a motorcycle, the "head tube" is normally called the steering head.
The head tube contains the headset, the bearings for the fork via its steerer tube. In an integrated headset, cartridge bearings interface directly with the surface on the inside of the head tube, on non-integrated headsets the bearings (in a cartridge or not) interface with "cups" pressed into the head tube.
Road racing bicycle forks have an offset of 40–50 mm (1.6–2.0 in). [7] The offset may be implemented by curving the forks, adding a perpendicular tab at their lower ends, offsetting the fork blade sockets of the fork crown ahead of the steerer, or by mounting the forks into the crown at an angle to the steer tube.