Search results
Results From The WOW.Com Content Network
The process here is similar to that found in one of Arkwrights Water frames, though the size of the ring, spindle and traveller are predictably larger. Alternatively a 'twiner' is used: this is a modified spinning mule and is mainly consigned to the doubling of warp thread. [ 10 ]
Dove and Rose jacquard-woven silk and wool double cloth furnishing textile, designed by William Morris in 1879. [1]Double cloth or double weave (also doublecloth, double-cloth, doubleweave) is a kind of woven textile in which two or more sets of warps and one or more sets of weft or filling yarns are interconnected to form a two-layered cloth. [2]
The double rapier is used more frequently than the single rapier due to its increased pick insertion speed and ability to weave wider widths of fabric. The housing for the rapiers must take up as much space as the width of the machine. To overcome this problem, looms with flexible rapiers have been devised. The flexible rapier can be coiled as ...
Weaving a tapestry on a vertical loom in Konya, Turkey A Turkish carpet loom showing warp threads wrapped around the warp beam, above, and the fell being wrapped onto the cloth beam below. A simple handheld frame loom. Weaving is done on two sets of threads or yarns, which cross one another.
With each weaving operation, the newly constructed fabric must be wound on a cloth beam. This process is called taking up. At the same time, the warp yarns must be let off or released from the warp beams. To become fully automatic, a loom needs a filling stop motion which will brake the loom, if the weft thread breaks.
Viking longships used wool for sailcloth. The cloth was woven in one of three ways, according to locality and tradition: plain weave with individual threads going over and under each other, three-shaft twill with two threads going over and under at each cross thread, and four-shaft twill with thread interwoven with two threads at a time in either direction.
In the manufacture of cloth, warp and weft are the two basic components in weaving to transform thread and yarn into textile fabrics. The vertical warp yarns are held stationary in tension on a loom (frame) while the horizontal weft (also called the woof) is drawn through (inserted over and under) the warp thread. [1]
There is no need for layering to create a part, because a single fabric provides the full three-dimensional reinforcement. The 3-D woven fabric is a variant of the 2D weaving process, and it is an extension of the very old technique of creating double and triple woven cloth. 3D weaving allows the production of fabrics up to 10 cm in thickness. [1]