Search results
Results From The WOW.Com Content Network
The concentration of solvent in water ranges from 40 to 80%. Higher boiling solvents have the advantage of a lower process pressure. This is weighed against the more difficult solvent recovery by distillation. [2] Ethanol has been suggested as the preferred solvent due to cost and easy recovery.
Most of those methods, but not all, involve the use of a solvent either for liquid-liquid extraction or extractive distillation. Many different solvents are suitable, including sulfolane (C 4 H 8 O 2 S), furfural (C 5 H 4 O 2 ), tetraethylene glycol (C 8 H 18 O 5 ), dimethylsulfoxide (C 2 H 6 OS), and N-methyl-2-pyrrolidone (C 5 H 9 NO).
It is a common observation that when oil and water are poured into the same container, they separate into two phases or layers, because they are immiscible.In general, aqueous (or water-based) solutions, being polar, are immiscible with non-polar organic solvents (cooking oil, chloroform, toluene, hexane etc.) and form a two-phase system.
In this case, the extraction rate can be increased by increasing the rate of dissolution, for example by increasing flow rate of the solvent. Figure 4. Extraction Profile for Different Types of Extraction. The extraction curve of % recovery against time can be used to elucidate the type of extraction occurring.
The method of extractive distillation uses a separation solvent, which is generally non-volatile, has a high boiling point and is miscible with the mixture, but doesn't form an azeotropic mixture. The solvent interacts differently with the components of the mixture thereby causing their relative volatilities to change.
The ketyl radical from sodium and benzophenone can also be used for removing both oxygen and water from inert solvents such as hydrocarbons and ethers; the degassed solvent can be separated by distillation. The latter method is particularly useful because a high concentration of ketyl radical generates a deep blue colour, indicating the solvent ...
The volume ratio between the first and second solvent is critical. A higher ratio of first to second solvent will lead to permanent dissolution of the desired product, while a low ratio will lead to minimal pure crystal recovery. The terms first and second are in reference to crude product soluble and crude product insoluble solvents respectively.
Industrial mixer settlers are commonly used in the copper, nickel, uranium, lanthanide, and cobalt hydrometallurgy industries, when solvent extraction processes are applied. They are also used in the Nuclear reprocessing field to separate and purify primarily Uranium and Plutonium, removing the fission product impurities.