Search results
Results From The WOW.Com Content Network
The High-Speed Serial Interface (HSSI) is a differential ECL serial interface standard developed by Cisco Systems and T3plus Networking primarily for use in WAN router connections. It is capable of speeds up to 52 Mbit/s with cables up to 50 feet (15 m) in length.
A male DE-9 connector on an IBM PC compatible computer (with serial port symbol) used for an RS-232 serial port A female DE-9 connector on an RS-232 cable.. A serial port is a serial communication interface through which information transfers in or out sequentially one bit at a time. [1]
Management Data Input/Output (MDIO), also known as Serial Management Interface (SMI) or Media Independent Interface Management (MIIM), is a serial bus defined for the Ethernet family of IEEE 802.3 standards for the Media Independent Interface, or MII. The MII connects media access control (MAC) devices with Ethernet physical layer (PHY ...
Data Terminal Ready (DTR) is a control signal in RS-232 serial communications, transmitted from data terminal equipment (DTE), such as a computer, to data communications equipment (DCE), for example a modem, to indicate that the terminal is ready for communications and the modem may initiate a communications channel.
A DB-25 connector as described in the RS-232 standard Data circuit-terminating equipment (DCE) and data terminal equipment (DTE) network. In telecommunications, RS-232 or Recommended Standard 232 [1] is a standard originally introduced in 1960 [2] for serial communication transmission of data.
Several factors allow serial to be clocked at a higher rate: Clock skew between different channels is not an issue (for unclocked asynchronous serial communication links). This can be caused by mismatched wire or conductor lengths. [17] [18] A serial connection requires fewer interconnecting cables (e.g., wires/fibers) and hence occupies less ...
Data Carrier Detect (DCD) or Carrier Detect (CD) is a control signal present inside an RS-232 serial communications cable that goes between a computer and another device, such as a modem. This signal is a simple "high/low" status bit that is sent from a data communications equipment (DCE) to a data terminal equipment (DTE), i.e., from the modem ...
Interlaken is a royalty-free interconnect protocol.. It was invented by Cisco Systems and Cortina Systems in 2006, [1] optimized for high-bandwidth and reliable packet transfers. It builds on the channelization and per channel flow control features of SPI-4.2, while reducing the number of integrated circuit (chip) I/O pins by using high speed SerDes technology.