Ad
related to: brewers spent grain moisture content test astm chart for concrete
Search results
Results From The WOW.Com Content Network
Spent grain from brewing. Containers of spent grain outside the brewery. A product demonstration of crackers made from spent grain at a local supermarket. Brewer's spent grain (BSG) or draff is a food waste that is a byproduct of the brewing industry that makes up 85 percent [1] of brewing waste.
The flow table test or slump-flow test is a method to determine consistency of fresh concrete. Flow table test is also used to identify transportable moisture limit of solid bulk cargoes. [ 1 ] It is used primarily for assessing concrete that is too fluid (workable) to be measured using the slump test , because the concrete will not retain its ...
The moisture content at which it takes 25 drops of the cup to cause the groove to close over a distance of 12.7 millimetres (0.50 in) is defined as the liquid limit. The test is normally run at several moisture contents, and the moisture content which requires 25 blows to close the groove is interpolated from the test results.
There is no ASTM standard for using a concrete moisture meter to determine a final moisture content reading. Concrete moisture meters, [4] either non-pin or pin meters are affected by what it sees in the concrete. This can be anything from the density of the concrete and aggregate size to the chemical properties of the slab.
The water is removed from the grain, and becomes wort for brewing. The remaining grain, called "spent grain" for the removal of simple sugars and starch, can then be sold as a by-product. The conversion rate of grains to ethanol and distillers grains varies with the different types of grains and the process used. The details are outlined below:
Thermal Integrity Profiling (TIP) is a non-destructive testing method used to evaluate the integrity of concrete foundations. It is standardized by ASTM D7949 - Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations. The testing method was first developed in the mid 1990s at the University of South Florida.
The Proctor compaction test is a laboratory method of experimentally determining the optimal moisture content at which a given soil type will become most dense and achieve its maximum dry density. The test is named in honor of Ralph Roscoe Proctor [ de ] , who in 1933 showed that the dry density of a soil for a given compactive effort depends ...
There are two industry standards for measuring moisture vapor emissions in concrete: calcium chloride testing (ASTM F1869) and relative humidity testing (ASTM F2170). [4] Epoxy moisture control systems can be used when these tests determine that the moisture vapor emissions need to be remediated in order to install the selected floor covering ...