Ad
related to: jaze upstream bandwidth settings
Search results
Results From The WOW.Com Content Network
This specification has the same upstream/downstream frequency split of 276 kHz as Annex B, but does not have lower frequency limit of 138 kHz, allowing upstream bandwidth to be increased from 1.8 Mbit/s to 3.5 Mbit/s. This is similar to Annex M, but Annex J can not have POTS on the same line.
This is a list of interface bit rates, is a measure of information transfer rates, or digital bandwidth capacity, at which digital interfaces in a computer or network can communicate over various kinds of buses and channels. The distinction can be arbitrary between a computer bus, often closer in space, and larger telecommunications networks.
ITU G.992.3 is an ITU (International Telecommunication Union) standard, also referred to as ADSL2 or G.dmt.bis.It optionally extends the capability of basic ADSL in data rates to 12 Mbit/s downstream and, depending on Annex version, up to 3.5 Mbit/s upstream (with a mandatory capability of ADSL2 transceivers of 8 Mbit/s downstream and 800 kbit/s upstream). [1]
The 10 Gbit/s Ethernet Passive Optical Network standard, better known as 10G-EPON allows computer network connections over telecommunication provider infrastructure. The standard supports two configurations: symmetric, operating at 10 Gbit/s data rate in both directions, and asymmetric, operating at 10 Gbit/s in the downstream (provider to customer) direction and 1 Gbit/s in the upstream ...
Symmetric connections such as Symmetric Digital Subscriber Line (SDSL) and T1, however, offer identical upstream and downstream rates. If a node A on the Internet is closer (fewer hops away) to the Internet backbone than a node B, then A is said to be upstream of B or conversely, B is downstream of A. Related to this is the idea of upstream ...
VDSL2 permits the transmission of asymmetric and symmetric aggregate data rates up to 300+ Mbit/s downstream and upstream on twisted pairs using a bandwidth up to 35 MHz on its latest version. [6] It deteriorates quickly from a theoretical maximum of 350 Mbit/s at source to 100 Mbit/s at 500 m (1640.42 ft) and 50 Mbit/s at 1000 m (3280.84 ft ...
Bandwidth management is the process of measuring and controlling the communications (traffic, packets) on a network link, to avoid filling the link to capacity or overfilling the link, [1] which would result in network congestion and poor performance of the network.
Diagram showing a possible configuration for a wired–wireless mesh network, connected upstream via a VSAT link (click to enlarge) A wireless mesh network (WMN) is a communications network made up of radio nodes organized in a mesh topology. It can also be a form of wireless ad hoc network. [1] A mesh refers to rich interconnection among ...