Search results
Results From The WOW.Com Content Network
Stepwise magnification by 6% per frame into a 39-megapixel image. In the final frame, at about 170x, an image of a bystander is seen reflected in the man's cornea. Magnification is the process of enlarging the apparent size, not physical size, of something. This enlargement is quantified by a size ratio called optical magnification.
35 mm equivalent focal lengths are calculated by multiplying the actual focal length of the lens by the crop factor of the sensor. Typical crop factors are 1.26× – 1.29× for Canon (1.35× for Sigma "H") APS-H format, 1.5× for Nikon APS-C ("DX") format (also used by Sony, Pentax, Fuji, Samsung and others), 1.6× for Canon APS-C format, 2× for Micro Four Thirds format, 2.7× for 1-inch ...
To focus an object 1 m away (s 1 = 1,000 mm), the lens must be moved 2.6 mm farther away from the film plane, to s 2 = 52.6 mm. The focal length of a lens determines the magnification at which it images distant objects. It is equal to the distance between the image plane and a pinhole that images distant objects the same size as the lens in ...
(In the case of a lens with distortion, e.g., a fisheye lens, a longer lens with distortion can have a wider angle of view than a shorter lens with low distortion) [3] Angle of view may be measured horizontally (from the left to right edge of the frame), vertically (from the top to bottom of the frame), or diagonally (from one corner of the ...
That distance is sometimes given on the filter in millimeters. A +3 close-up lens has a maximal working distance of 0.333 m or 333 mm. The magnification is the focal distance of the objective lens (f) divided by the focal distance of the close-up lens; i.e., the focal distance of the objective lens (in meters) multiplied by the diopter value (D) of the close-up lens:
The projection lens magnification is fixed. Different views of measured pieces often require different magnifications. However, the usual projector factory configuration is with a single lens, so according to needs, additional lenses may be purchased and used.
The dioptre can also be used as a measurement of curvature equal to the reciprocal of the radius measured in metres. For example, a circle with a radius of 1/2 metre has a curvature of 2 dioptres. If the curvature of a surface of a lens is C and the index of refraction is n, the optical power is φ = (n − 1)C. If both surfaces of the lens are ...
Spectrometer or monochromator for generating or measuring a portion of the optical spectrum, for the purpose of chemical or material analysis; Autocollimator which is used to measure angular deflections; Vertometer which is used to determine refractive power of lenses such as glasses, contact lenses and magnifier lens