Ads
related to: measuring window shades width first or height 1 6 gpf 6 0 lpf toilet seat replacement
Search results
Results From The WOW.Com Content Network
In the United States, Older conventional toilet models, typically those built before 1982, can use 5 to 7 gallons of water per flush. Toilets from the era of 1982-1993 may use a somewhat smaller 3.5 gpf. Modern washdown and symphonic variant standard flush toilets in the United States use 1.6 gpf or 6 lpf (liters per flush). [12]
Shading coefficient (SC) is a measure of thermal performance of a glass unit (panel or window) in a building. It is the ratio of solar gain (due to direct sunlight) passing through a glass unit to the solar energy which passes through 3mm Clear Float Glass. [ 1 ]
The shading coefficient (SC) is a measure of the radiative thermal performance of a glass unit (panel or window) in a building.It is defined as the ratio of solar radiation at a given wavelength and angle of incidence passing through a glass unit to the radiation that would pass through a reference window of frameless 3 millimetres (0.12 in) Clear Float Glass. [3]
A low-flush toilet (or low-flow toilet or high-efficiency toilet) is a flush toilet that uses significantly less water than traditional high-flow toilets. Before the early 1990s in the United States, standard flush toilets typically required at least 3.5 gallons (13.2 litres) per flush and they used float valves that often leaked, increasing their total water use.
Jones's glossmeter used a geometric configuration of 45°/0°/45° whereby the surface was illuminated at 45° and two incident reflective angles measured and compared at 0° (diffuse reflectance) and 45° (diffuse plus specular reflectance). Jones was the first to emphasize the importance of using goniophotometric measurements in studies of gloss.
Clear double glazing has a U-factor between 1.8 and 3 W/(m 2 ⋅K) or between 0.3 and 0.5 Btu/(h⋅ft 2 ⋅°F) (about R-2) Clear triple glazing has a U-factor between 0.5 and 1 W/(m 2 ⋅K) or between 0.1 and 0.2 Btu/(h⋅ft 2 ⋅°F) (about R-3). Double and triple glazing are critical for energy efficiency. Single glass windows are no longer ...