Ads
related to: activated sludge treatment
Search results
Results From The WOW.Com Content Network
Activated sludge tank at Beckton sewage treatment plant, UK.The white bubbles are due to the diffused air aeration system. The activated sludge process is a type of biological wastewater treatment process for treating sewage or industrial wastewaters using aeration and a biological floc composed of bacteria and protozoa.
There are many other aerobic biological processes for treatment of wastewaters, for example activated sludge, trickling filters, rotating biological contactors and biofilters. They all have in common the use of oxygen (or air ) and microbial action to reduce the pollutants in wastewaters.
Sludge treatment technologies that are used for thickening or dewatering of sludge have two products: the thickened or dewatered sludge, and a liquid fraction which is called sludge treatment liquids, sludge dewatering streams, liquors, centrate (if it stems from a centrifuge), filtrate (if it stems from a belt filter press) or similar.
One type of system that combines secondary treatment and settlement is the cyclic activated sludge (CASSBR), or sequencing batch reactor (SBR). Typically, activated sludge is mixed with raw incoming sewage, and then mixed and aerated. The settled sludge is run off and re-aerated before a proportion is returned to the headworks.
Mechanized sewage treatment typically includes settling in a primary clarifier, followed by biological treatment and a secondary clarifier. Both clarifiers produce waste sludge requiring sewage sludge treatment and disposal. Activated sludge agitates a portion of the secondary clarifier sludge in the primary clarifier effluent.
The sludge age may be too low to enable nitrification. The typical control band for the concentration of MLSS is 2 to 4 g/L for conventional activated sludge, or up to 15 g/L for membrane bioreactors. One of the easiest control procedures for activated sludge systems is the Constant Mixed Liquor Suspended Solids method.
Activated sludge sewage treatment plant in Massachusetts, US. The term sewage treatment plant (STP) (or sewage treatment works) is nowadays often replaced with the term wastewater treatment plant (WWTP). [7] [8] Strictly speaking, the latter is a broader term that can also refer to industrial wastewater treatment.
Sewage sludge treatment is the process of removing contaminants from wastewater.Sewage sludge is produced from the treatment of wastewater in sewage treatment plants and consists of two basic forms — raw primary sludge and secondary sludge, also known as activated sludge in the case of the activated sludge process.