Ads
related to: dovetail groove mount chart
Search results
Results From The WOW.Com Content Network
Dovetail mount can also refer to a dovetail track running perpendicular to the bore, [9] often used for smaller front sights posts and rear sights blades found on handguns and some rifles. This mounting method is meant as a semi-permanent friction fit mounting solution where a slot is milled , for instance in the slide of a pistol, [ 10 ] and a ...
Aimpoint Acro rail: A dovetail rail for attaching a sight via a clamping mechanism, and with a 4 mm [24] wide straight recoil lug groove. The dovetail is approximately 16.5 mm wide, and is radiused so as not to have any sharp edges. The mount is compact enough to be used on pistols, as well as rifles and shotguns.
The Picatinny rail has a similar profile to the Weaver, but the recoil groove width of the Picatinny rail is 0.206 in (5.23 mm) versus 0.180 in (4.57 mm) of the Weaver rail/mount, and by contrast with the Weaver, the spacing of the Picatinny recoil groove centers is consistent, at 0.394 in (10.01 mm). [5]
It is similar in concept to the earlier commercial Weaver rail mount used to mount telescopic sights, but is taller and has wider slots at regular intervals along the entire length. The MIL-STD-1913 locking slot width is 0.206 in (5.23 mm). The spacing of slot centres is 0.394 in (10.01 mm) and the slot depth is 0.118 in (3.00 mm). [8]
Wedged half-dovetail: a mortise in which the back is wider, or taller, than the front, or opening. The space for the wedge initially leaves room to insert the tenon. The wedge, after the tenon is engaged, prevents its withdrawal. Through-wedged half-dovetail: a wedged half-dovetail mortise that passes entirely through the piece.
The most commonly encountered mounting systems are the 3 ⁄ 8 inch (9.5 mm) and the 11 mm dovetail rails (sometimes called "tip-off mounts") commonly found on rimfires and air guns, the Weaver rails, the mil-spec MIL-STD-1913 Picatinny rail (STANAG 2324), and the NATO Accessory Rail (STANAG 4694). Ruger uses a proprietary scope base system ...
A dovetail joint or simply dovetail is a joinery technique most commonly used in woodworking joinery (carpentry), including furniture, cabinets, [1] log buildings, and traditional timber framing. Noted for its resistance to being pulled apart, also known as tensile strength , the dovetail joint is commonly used to join the sides of a drawer to ...
NATO Accessory Rail (STANAG 4694) The NATO Accessory Rail (NAR), defined by NATO Standardization Agreement (STANAG) 4694, is a rail interface system standard for mounting accessory equipment such as telescopic sights, tactical lights, laser aiming modules, night vision devices, reflex sights, foregrips, bipods and bayonets to small arms such as rifles and pistols.