Ad
related to: feet and inches diagonal calculator
Search results
Results From The WOW.Com Content Network
Example: for a 1080 HDTV used at a distance of 250 cm, you need to find a screen whose height is close to 250 / 3.2 = 78 cm (63 inches diagonally). Find the right video resolution. Example: a 53 cm high screen (43 inches diagonal), located at a distance of 300 cm, does not need to show video with a resolution higher than HD 720.
Common screen dimensions are listed in the table below (the most common diagonal dimensions in inches as of 2020 are bolded). If the display is not listed, then the following equations can be used. Note that D is the diagonal (in centimeters or inches), W is the width (in pixels), and H is the height (in pixels).
For example, a 15-inch (38 cm) display whose dimensions work out to 12 inches (30.48 cm) wide by 9 inches (22.86 cm) high, capable of a maximum 1024×768 (or XGA) pixel resolution, can display around 85 PPI, or 33.46 PPCM, in both the horizontal and vertical directions. This figure is determined by dividing the width (or height) of the display ...
The prime symbol ′ is commonly used to represent feet (ft), and the double prime ″ is used to represent inches (in). [2] The triple prime ‴, as used in watchmaking, represents a ligne (1 ⁄ 12 of a "French" inch, or pouce, about 2.26 millimetres or 0.089 inches).
The megalithic yard is a hypothetical ancient unit of length equal to about 2.72 feet (0.83 m). [ 1 ] [ 2 ] [ 3 ] Some researchers believe it was used in the construction of megalithic structures. The proposal was made by Alexander Thom as a result of his surveys of 600 megalithic sites in England , Scotland , Wales and Brittany . [ 4 ]
A common size for LCDs manufactured for small consumer electronics, basic mobile phones and feature phones, typically in a 1.7" to 1.9" diagonal size. This LCD is often used in portrait (128×160) orientation. The unusual 5:4 aspect ratio makes the display slightly different from QQVGA dimensions. 160×128 (20k) 160 128 20,480 5:4 UNNAMED UNNAMED
As with metric-based guide numbers, foot-based guide numbers are a two-factor unit of measure except the units are f‑number⋅feet. To convert a guide number given in meters to feet, divide by 0.3048. To convert a guide number given in feet to meters, multiply by 0.3048.
A scale ruler is a tool for measuring lengths and transferring measurements at a fixed ratio of length; two common examples are an architect's scale and engineer's scale.In scientific and engineering terminology, a device to measure linear distance and create proportional linear measurements is called a scale.