Search results
Results From The WOW.Com Content Network
The American Society of Civil Engineers (or ASCE) specified rail profiles in 1893 [20] for 5 lb/yd (2.5 kg/m) increments from 40 to 100 lb/yd (19.8 to 49.6 kg/m). Height of rail equaled width of foot for each ASCE tee-rail weight; and the profiles specified fixed proportion of weight in head, web and foot of 42%, 21% and 37%, respectively.
For a line with a maximum speed of 60 km/h (37 mph), buffer-and-chain couplers increase the minimum radius to around 150 m (164 yd; 492 ft). As narrow-gauge railways , tramways , and rapid transit systems normally do not interchange with mainline railways, instances of these types of railway in Europe often use bufferless central couplers and ...
Slab track with flexible noise-reducing rail fixings, built by German company Max Bögl, on the Nürnberg–Ingolstadt high-speed line. A ballastless track or slab track is a type of railway track infrastructure in which the traditional elastic combination of sleepers and ballast is replaced by a rigid construction of concrete or asphalt.
A railway track (CwthE and UIC terminology) or railroad track (NAmE), also known as permanent way (CwthE) [1] or "P Way" (BrE [2] and Indian English), is the structure on a railway or railroad consisting of the rails, fasteners, sleepers (railroad ties in American English) and ballast (or slab track), plus the underlying subgrade.
Bi-block (or twinblock) ties consist of two concrete rail supports joined by a steel bar. Advantages include increased lateral resistance and lower weight than monobloc concrete ties, as well as elimination of damage from torsional forces on the ties center due to the more flexible steel connections. [ 38 ]
construction site workers loading water, sand, ballast and cement into a concrete mixer. Concrete is typically used in commercial buildings and civil engineering projects, for its strength and durability. Concrete is a mix of cement and water plus an aggregate such as sand or stone. Its compression strength means it can support heavy weights. [5]
The 1 ft 11 + 1 ⁄ 2 in (597 mm) gauge Lynton and Barnstaple Railway (1898 to 1935) in North Devon, experimented with concrete sleepers at a number of locations along the line. As the sleepers were cast to gauge, they were of little use outside the station areas on this very curvaceous line where gauge slackening was commonly required.
Grooved rail, used when track is laid in places traversed by other vehicles or pedestrians. A grooved rail, groove rail, or girder rail is a special rail with a groove designed for tramway or railway track in pavement or grassed surfaces (grassed track or track in a lawn). The head on the right-hand side of the rail bears the vehicle's weight.