When.com Web Search

  1. Ads

    related to: coax splitter with 2 inputs and 3

Search results

  1. Results From The WOW.Com Content Network
  2. Power dividers and directional couplers - Wikipedia

    en.wikipedia.org/wiki/Power_dividers_and...

    However using port 2 or port 4 as the input results in a 180° hybrid. [30] This fact leads to another useful application of the hybrid ring: it can be used to produce sum (Σ) and difference (Δ) signals from two input signals as shown in figure 12. With inputs to ports 2 and 3, the Σ signal appears at port 1 and the Δ signal appears at port ...

  3. Fiber-optic splitter - Wikipedia

    en.wikipedia.org/wiki/Fiber-optic_splitter

    The FBT splitter uses two (or more) fibers. The fibers' coating layer is removed. Both fibers, at the same time, are stretched under a heating zone thus forming a double cone. This special waveguide structure allows control of the splitting ratio via controlling length of the fiber torsion angle and stretch.

  4. Wilkinson power divider - Wikipedia

    en.wikipedia.org/wiki/Wilkinson_power_divider

    No loss occurs when the signals at ports 2 and 3 are in phase and have equal magnitude. In case of noise input to ports 2 and 3, the noise level at port 1 does not increase, half of the noise power is dissipated in the resistor. By cascading, the input power might be divided to any -number of outputs.

  5. Single-cable distribution - Wikipedia

    en.wikipedia.org/wiki/Single-cable_distribution

    [3] The converted transponders of the various users are then combined, and sent via the single coaxial cable to the receivers. The combined signal is tapped or split to reach every user. Silicon vendors have developed complex integrated circuits that greatly reduce the cost of implementing the single-cable distribution function. A channel ...

  6. SMA connector - Wikipedia

    en.wikipedia.org/wiki/SMA_connector

    SMA connectors must not be confused with the standard household 75-ohm type F coax connector (diameters: male 7 ⁄ 16 inch (11 mm) circular or hex; female 3 ⁄ 8 inch (9.5 mm) external threads), as there is only about a 2 mm difference overall in the specifications. Type F cannot be mated with SMA connectors without the use of an adapter.

  7. ARINC 818 - Wikipedia

    en.wikipedia.org/wiki/ARINC_818

    ARINC 818 (Avionics Digital Video Bus) is a point-to-point, 8b/10b-encoded (or 64B/66B for higher speeds) serial protocol for transmission of video, audio, and data. The protocol is packetized but is video-centric and very flexible, supporting an array of complex video functions including the multiplexing of multiple video streams on a single link or the transmission of a single stream over a ...