Ads
related to: lumber grade #2 vs stud gauge diameter table top
Search results
Results From The WOW.Com Content Network
The Log Scaler measures the cut trees to determine the scale (volume) and quality (grade) of the wood to be used for manufacturing. When logs are sold, in order to determine the basis for a sale price in a standard way, the logs are "scaled" which means they are measured, identified as to species, and deductions for defects assigned to produce ...
Interior loadbearing walls are framed in the same way as exterior walls. Studs are usually 1 + 1 ⁄ 2 in × 3 + 1 ⁄ 2 in (38 mm × 89 mm) lumber spaced at 16 in (410 mm) on center. This spacing may be changed to 12 or 24 in (300 or 610 mm) depending on the loads supported and the type and thickness of the wall finish used.
The timber would be typically called battens (7 inches wide), deals (above 7, usually 9 inches wide) and planks (11 inches wide); boards were under 2 inches thick. [3] [4] The standard hundred of the Russian capital of Saint Petersburg was 120 boards which were 12 feet long, 1 1 ⁄ 2 inches thick and 11 inches wide – a volume of 165 cubic ...
Wall studs are framing components in timber or steel-framed walls, that run between the top and bottom plates.It is a fundamental element in frame building. The majority non-masonry buildings rely on wall studs, with wood being the most common and least-expensive material used for studs.
In 1961, at a meeting in Scottsdale, Arizona, the Committee on Grade Simplification and Standardization agreed to what is now the current U.S. standard: in part, the dressed size of a 1-inch (nominal) board was fixed at 3 ⁄ 4 inch; while the dressed size of 2 inch (nominal) lumber was reduced from 1 + 5 ⁄ 8 inch to the current 1 + 1 ⁄ 2 inch.
The Central Committee on Lumber Standards was started in 1922 by Herbert Hoover when he was U.S. Secretary of Commerce at the request of the lumber industry. [4] Chaired by John W. Blodgett, the Central Committee was intended to be a way to create voluntary lumber standards without imposing formal government regulations, in order to solve the problem of lumber manufacturers selling lumber that ...
Timber-framed structures differ from conventional wood-framed buildings in several ways. Timber framing uses fewer, larger wooden members, commonly timbers in the range of 15 to 30 cm (6 to 12 in), while common wood framing uses many more timbers with dimensions usually in the 5- to 25-cm (2- to 10-in) range.
Light-gauge (25-gauge or lighter) provides better sound isolation than 16-20-gauge steel, and noticeably better performance than wood studs. [21] When heavy gauge steel or wood studs are spaced 16 inches (410 mm) on center, additional resonances form which further lower the sound isolation performance of a partition.