Search results
Results From The WOW.Com Content Network
28–40 GPa (4.1 × 10 ^ 6 –5.8 × 10 ^ 6 psi) Yield strength (austenite) 195–690 MPa (28.3–100.1 ksi) (martensite) 70–140 MPa (10–20 ksi) Poisson's ratio: 0.33: Nitinol properties are particular to the precise composition of the alloy and its processing. These specifications are typical for commercially available shape memory nitinol ...
The ultimate tensile strength of a material is an intensive property; therefore its value does not depend on the size of the test specimen.However, depending on the material, it may be dependent on other factors, such as the preparation of the specimen, the presence or otherwise of surface defects, and the temperature of the test environment and material.
Adsorption rate and tensile strength: Strength retention for at least 7 days. Maintains strength for 10–14 days [2] 84% at 2 weeks, 23% at 4 weeks [2] 80% at 2 weeks, 44% at 8 weeks. Complete absorption within 200 days [2] Structure: Multifilament: Multifilament: Braided: Monofilament Origin: Bovine serosa surface finish. Made by twisting ...
The theoretical strength can also be approximated using the fracture work per unit area, which result in slightly different numbers. However, the above derivation and final approximation is a commonly used metric for evaluating the advantages of a material's mechanical properties. [3]
Most metals have an -value between 0.10 and 0.50. In one study, strain hardening exponent values extracted from tensile data from 58 steel pipes from natural gas pipelines were found to range from 0.08 to 0.25, [ 1 ] with the lower end of the range dominated by high-strength low alloy steels and the upper end of the range mostly normalized steels.
Tensile testing, also known as tension testing, [1] is a fundamental materials science and engineering test in which a sample is subjected to a controlled tension until failure. Properties that are directly measured via a tensile test are ultimate tensile strength , breaking strength , maximum elongation and reduction in area. [ 2 ]
Very importantly, constantan can be processed for self-temperature compensation to match a wide range of test material coefficients of thermal expansion.A-alloy is supplied in self-temperature-compensation (S-T-C) numbers 00, 03, 05, 06, 09, 13, 15, 18, 30, 40, and 50, for use on test materials with corresponding thermal expansion coefficients, expressed in parts per million by length (or μm ...
NiTiNOL 60, or 60 NiTiNOL, is a Nickel Titanium alloy (nominally Ni-40wt% Ti) discovered in the late 1950s by the U. S. Naval Ordnance Laboratory (hence the "NOL" portion of the name NiTiNOL). [1] Depending upon the heat treat history, 60 NiTiNOL has the ability to exhibit either superelastic properties in the hardened state or shape memory ...