Ads
related to: waist to floor measurements for height and width of 2 story house layout
Search results
Results From The WOW.Com Content Network
A floor plan [2] is an overhead view of the completed house. On the plan, you will see parallel lines that scale at whatever width the walls are required to be. Dimensions are usually drawn between the walls to specify room sizes and wall lengths.
A storey pole (or story pole, storey rod, [1] story stick, [2] jury stick, [3] scantling, [4] scantillon [5]) is a length of narrow board usually cut to the height of one storey. [6] It is used as a layout tool for any kind of repeated work in carpentry including stair-building , framing , timber framing , siding , brickwork , and setting tiles.
A floor plan is not a top view or bird's-eye view; it is a measured drawing to scale of the layout of a floor in a building. A top view or bird's-eye view does not show an orthogonally projected plane cut at the typical four foot height above the floor level. A floor plan may show any of the following elements: [3] interior walls and hallways ...
The dropped ceilings on each story are about 9 feet (2.7 m) high. The floor-to-floor height, as measured between the floor slabs of adjacent stories, is 12 feet 4 inches (3.76 m). [49] The west end of the slab is cantilevered 5 feet (1.5 m) from the furthest column while the east end is cantilevered 9 feet 8.5 inches (2.959 m). [63]
A bi-level includes two short sets of stairs and two levels. [2] The entry is between floors. The front door opens to a landing. One short flight of stairs leads up to the top floor; another short flight of stairs leads down. The top floor tends to be full height ceilings with the living room, dining room, kitchen, bedrooms and bathrooms.
Floor Area ratio is sometimes called floor space ratio (FSR), floor space index (FSI), site ratio or plot ratio. The difference between FAR and FSI is that the first is a ratio, while the latter is an index. Index numbers are values expressed as a percentage of a single base figure. Thus an FAR of 1.5 is translated as an FSI of 150%.
In architecture, construction, and real estate, floor area, floor space, or floorspace is the area (measured in square metres or square feet) taken up by a building or part of it. The ways of defining "floor area" depend on what factors of the building should or should not be included, such as external walls, internal walls, corridors, lift ...
The width of the ribs is typically 130 mm (5 in) to 150 mm (6 in), and ribs usually have steel rod reinforcements. [5] The distance between ribs is typically 915 mm (3 ft). [3] The height of the ribs and beams should be 1 ⁄ 25 of the span between columns. [3] The width of the solid area around the column should be 1 ⁄ 8 of