Ad
related to: amazon reel to reel recording tapes for sale on ebay by owner florida gulf coast
Search results
Results From The WOW.Com Content Network
7-inch reel of 1 ⁄ 4-inch-wide (6.4 mm) recording tape, typical of non-professional use in the 1950s–70s. Studios generally used 10 1 ⁄ 2 inch reels on PET film backings. Inexpensive reel-to-reel tape recorders were widely used for voice recording in the home and in schools, along with dedicated models expressly made for business dictation.
The first releases featured tape wrapped around in a single reel known as "tape cartridges". There were tape cartridges for professional use like the Fidelipac [4] and cartridges for consumers with 8-track cartridge. [5] Eventually the need to replicate reel to reel recording led to the creation of the "cassette" format which utilized two reels ...
Changing home audio trends affected BSR in the early 1980s. Although the company produced reel-to-reel tape decks in addition to their turntables and changers, consumers began to expect portability from their music players, and BSR faced competition from cassette tape players, particularly Sony's Walkman. In the first five years of the 1980s ...
DASH is capable of recording two channels of audio on a quarter-inch tape, and 24 or 48 tracks on 1 ⁄ 2-inch-wide (13 mm) tape [1] [2] [3] on open reels of up to 14 inches. The data is recorded on the tape linearly, [ 4 ] with a stationary recording head , [ 5 ] as opposed to the DAT format, where data is recorded helically with a rotating ...
AMPEX quadruplex VR-1000A, the first commercially released video tape recorder in the late 1950s; quadruplex open-reel tape is 2 inches wide The first portable VTR, the suitcase-sized 1967 AMPEX quadruplex VR-3000 1976 Hitachi portable VTR, for Sony 1" type C; the source and take-up reels are stacked for compactness. However, only one reel is ...
This was a consumer, or home format based on the much larger and more expensive professional reel-to-reel tape multitrack recording systems that had been built for recording studios by 1954. [2] Professional four-track machines used either one inch or ½-inch tape at a speed of 15 or 30 inches per second (IPS) for the highest quality sound.
The first commonly available increase in tape length resulted from a reduction in backing thickness from 1.5 to 1.0 mil (38 to 25 μm) resulting in a total thickness reduction from 42 to 35 μm (1.7 to 1.4 mils), which allowed 3,600 ft (1,100 m), 1,800 ft (550 m), and 900 ft (270 m) tapes to fit on ten-and-a-half-, seven-, and five-inch reels respectively.
The RCA tape cartridge (labeled the RCA Sound Tape Cartridge [1]) is a magnetic tape audio format that was designed to offer stereo quarter-inch reel-to-reel tape recording quality in a convenient format for the consumer market. [2] It was introduced in 1958, following four years of development. [3]