Ads
related to: omnidirectional microphone for clear voice
Search results
Results From The WOW.Com Content Network
Boundary microphone (Audio-Technica ATM87R) A boundary microphone (or pressure zone microphone) is one or more small omnidirectional or cardioid condenser mic capsule(s) positioned near or flush with a boundary (surface) such as a floor, table, or wall. The capsule(s) is/are typically mounted in a flat plate or housing.
The diaphragm also had an anti-corrosion treatment to protect it from air-borne contamination from the presenter's voice. The D-22 and D-33 were dual-impedance microphones with the high or low impedance selected using an innovative "linkage bar" under the name plate and a unique "slide-lock" microphone stand mount.
An omnidirectional (or nondirectional) microphone's response is generally considered to be a perfect sphere in three dimensions. In the real world, this is not the case. As with directional microphones, the polar pattern for an "omnidirectional" microphone is a function of frequency.
Typically, an array is made up of omnidirectional microphones, directional microphones, or a mix of omnidirectional and directional microphones distributed about the perimeter of a space, linked to a computer that records and interprets the results into a coherent form. Arrays may also be formed using numbers of very closely spaced microphones.
The directionality of the 77-DX is variable. A rotating backshutter on the acoustic labyrinth, controlled by a screwdriver-operated slot at the rear of the microphone, allows the user to vary the microphone's pattern from omnidirectional in the fully closed position, to cardioid, to figure-8 (bidirectional) in the fully open position.
In 1953, Electro-Voice introduced the Model 647A, a small omnidirectional dynamic microphone fitted with a cord to go around the neck. [5] The body of the 647A was lightweight at 2 ounces (57 g) and relatively small at 0.75 inches (19 mm) in diameter and 3.63 inches (92 mm) in length. [ 6 ]