Search results
Results From The WOW.Com Content Network
Then the partial pressure of its vapor must be considered when obtaining its condensation temperature. For example, if the gas entering the condenser is a mixture of 25% ethanol vapor and 75% carbon dioxide (by moles) at 100 kPa (typical atmospheric pressure), the condensation surface must be kept below 48 °C, the boiling point of ethanol at ...
The Solvay process or ammonia–soda process is the major industrial process for the production of sodium carbonate (soda ash, Na 2 CO 3). The ammonia–soda process was developed into its modern form by the Belgian chemist Ernest Solvay during the 1860s. [ 1 ]
Condensation is the change of the state of matter from the gas phase into the liquid phase, and is the reverse of vaporization. The word most often refers to the water cycle . [ 1 ] It can also be defined as the change in the state of water vapor to liquid water when in contact with a liquid or solid surface or cloud condensation nuclei within ...
Old drawing of a chloralkali process plant (Edgewood, Maryland) The chloralkali process (also chlor-alkali and chlor alkali) is an industrial process for the electrolysis of sodium chloride (NaCl) solutions. It is the technology used to produce chlorine and sodium hydroxide (caustic soda), [1] which are
Polycondensation: a polymerization in which the growth of polymer chains proceeds by condensation reactions between molecules of all degrees of polymerization. Notes: The growth steps are expressed by: P x + P y → P x+y + L (x, y = 1, 2, …) where P x and P y denote chains of degrees of polymerization x and y, respectively, and L a low-molar ...
The addition of the two molecules typically proceeds in a step-wise fashion to the addition product, usually in equilibrium, and with loss of a water molecule (hence the name condensation). [3] The reaction may otherwise involve the functional groups of the molecule, and is a versatile class of reactions that can occur in acidic or basic ...
Capillary condensation is an important factor in both naturally-occurring and synthetic porous structures. In these structures, scientists use the concept of capillary condensation to determine pore size distribution and surface area through adsorption isotherms.
Such a technique consists of pumping a vacuum chamber to low pressures (<10 −5 torr) and heating a material to produce vapor to deposit the material onto a cold surface. The material to be vaporized is typically heated until its vapor pressure is high enough to produce a flux of several Angstroms per second by using an electrically resistive ...