Search results
Results From The WOW.Com Content Network
The chirp pulse compression process transforms a long duration frequency-coded pulse into a narrow pulse of greatly increased amplitude. It is a technique used in radar and sonar systems because it is a method whereby a narrow pulse with high peak power can be derived from a long duration pulse with low peak power.
Pulse compression is a signal processing technique commonly used by radar, sonar and echography to either increase the range resolution when pulse length is constrained or increase the signal to noise ratio when the peak power and the bandwidth (or equivalently range resolution) of the transmitted signal are constrained.
Chirp compression - Further information on compression techniques; Chirp spread spectrum - A part of the wireless telecommunications standard IEEE 802.15.4a CSS; Chirped mirror; Chirped pulse amplification; Chirplet transform - A signal representation based on a family of localized chirp functions. Continuous-wave radar; Dispersion (optics ...
Some other techniques can be used for stretching and compressing pulses, but these are not suitable as the main stretcher/compressor in CPA due to their limited amount of dispersion and due to their inability to handle high-intensity pulses. A pulse can be stretched simply by letting it propagate through a thick slab of transparent material ...
The radar is designed with high resistance to electronic countermeasures (ECM) and anti-radiation missiles (ARM). [ 1 ] The system automatically acquires, tracks, classifies , identifies and reports high- and low-altitude targets, including cruise missiles , unmanned aerial vehicles , and both rotary- and fixed-wing aircraft .
Pulse Doppler radar may have 50 or more pulses between the radar and the reflector. Pulse Doppler relies on medium pulse repetition frequency (PRF) from about 3 kHz to 30 kHz. Each transmit pulse is separated by 5 km to 50 km distance. Range and speed of the target are folded by a modulo operation produced by the sampling process.
The pulse width must be long enough to ensure that the radar emits sufficient energy so that the reflected pulse is detectable by its receiver. The amount of energy that can be delivered to a distant target is the product of two things; the peak output power of the transmitter, and the duration of the transmission.
The JL-10A airborne radar is a highly digitized pulse-Doppler radar with slotted planar array developed for the People's Liberation Army Air Force (PLAAF) as a replacement for the older Type 232H radar currently employed by the Chinese air force. The radar is built to MIL-STD-1553 standard so