Ads
related to: 35 tire dimensionstirerack.com has been visited by 100K+ users in the past month
Search results
Results From The WOW.Com Content Network
Prior to 1964, tires were all made to a 90% aspect ratio. Tire size was specified as the tire width in inches and the diameter in inches – for example, 6.50-15. [24] From 1965 to the early 1970s, tires were made to an 80% aspect ratio. Tire size was again specified by width in inches and diameter in inches.
Modern road tires have several measurements associated with their size as specified by tire codes like 225/70R14. The first number in the code (e.g., "225") represents the nominal tire width in millimeters. This is followed by the aspect ratio (e.g.,"70"), which is the height of the sidewall expressed as a percentage of the nominal tire width.
The overall diameter of the tire is then the rim diameter plus twice the tire's section height. The ISO 5775-1 standard also defines procedures for measuring tires and for calculating from the marking the maximum dimensions of a tire, which are needed by designers to determine clearance distances to other bicycle components.
The Tire and Rim Association (T&RA) is a voluntary U.S. standards organization that promotes the interchangeability of tires, rims, and allied parts. Of particular interest, they publish key tire dimensions, rim contour dimensions, tire valve dimension standards, and load/inflation standards.
The 6-wheel M34 had a single-wheel tandem and used 11:00×20 size tires, which required a wheel well in the cargo bed, while the 10-wheel M35 had a dual-wheel tandem and used smaller 9:00×20 tires, which did not require a wheel well.
Tire-size designations on the side of a tire. ... 22 psi) will be decreased by 9% to 1.35 bar (135 kPa; 19.6 psi), which translates to a 30% decrease in gauge ...