Search results
Results From The WOW.Com Content Network
Electrostatic discharge (ESD) is a subclass of electrical overstress and may cause immediate device failure, permanent parameter shifts and latent damage causing increased degradation rate. It has at least one of three components, localized heat generation, high current density and high electric field gradient; prolonged presence of currents of ...
A residual-current device (RCD), residual-current circuit breaker (RCCB) or ground fault circuit interrupter (GFCI) [a] is an electrical safety device, more specifically a form of Earth-leakage circuit breaker, that interrupts an electrical circuit when the current passing through line and neutral conductors of a circuit is not equal (the term residual relating to the imbalance), therefore ...
In an electric power system, a fault or fault current is any abnormal electric current. For example, a short circuit is a fault in which a live wire touches a neutral or ground wire. An open-circuit fault occurs if a circuit is interrupted by a failure of a current-carrying wire (phase or neutral) or a blown fuse or circuit breaker.
Power system protection is a branch of electrical power engineering that deals with the protection of electrical power systems from faults [citation needed] through the disconnection of faulted parts from the rest of the electrical network. The objective of a protection scheme is to keep the power system stable by isolating only the components ...
In addition to a circuit analysis, a WCCA often includes stress and derating analysis, failure modes and effects criticality and reliability prediction . The specific objective is to verify that the design is robust enough to provide operation which meets the system performance specification over design life under worst-case conditions and ...
They include corrosion, welding of contacts due to an abnormal electric current, return spring fatigue failure, unintended command failure, dust accumulation and blockage of mechanism, etc. Seldom only one cause (hazard) can be identified that creates system failures. The real root causes can in theory in most cases be traced back to some kind ...
Circuit-breakers can be placed at portions of a circuit in series to the path of current it will affect. If more current than expected goes through the circuit-breaker, the circuit breaker "opens" the circuit and stops all current. A fuse is a common type of circuit breaker that involves direct effect of Joule-overheating.
CAF commonly occurs between adjacent vias (i.e. plated through holes) inside a PCB, as the copper migrates along the glass/resin interface from anode to cathode.CAF failures can manifest as current leakage, intermittent electrical shorts, and even dielectric breakdown between conductors in printed circuit boards. [3]