Search results
Results From The WOW.Com Content Network
This can be avoided by unplugging the appliance or using a power strip and using the switch on the power strip to cut all power to the appliance." [3] Standby power used by older devices can be as high as 10–15 W per device, [4] while a modern HD LCD television may use less than 1 W in standby mode. Some appliances use no energy when turned off.
The part that converts electricity into heat is called a heating element. Among the applications are: Buildings are often heated with electric heaters where grid power is available. Electric stoves and ovens use Joule heating to cook food. Soldering irons generate heat to melt conductive solder and make electrical connections.
A General Electric NE-34 glow lamp, manufactured circa 1930. Neon was discovered in 1898 by William Ramsay and Morris Travers.The characteristic, brilliant red color that is emitted by gaseous neon when excited electrically was noted immediately; Travers later wrote, "the blaze of crimson light from the tube told its own story and was a sight to dwell upon and never forget."
Lamplough's 'valve' was a form of rocker switch, on which were mounted two glass bulbs, one black, the other clear, part-filled with liquid ether and linked by a tube. During the day, heat from the sunlight would cause the air in the black bulb to expand, forcing the liquid into the clear bulb, the additional weight tipping the switch and ...
A thermal switch (sometimes thermal reset or thermal cutout (TCO)) is a device which normally opens at a high temperature (often with a faint "plink" sound) and re-closes when the temperature drops. The thermal switch may be a bimetallic strip, often encased in a tubular glass bulb to protect it from dust or short circuit. Another common design ...
An air conditioning system with a TX valve is often more efficient than those with designs that do not use one. [2] Also, TX valve air conditioning systems do not require an accumulator (a refrigerant tank placed downstream of the evaporator's outlet), since the valves reduce the liquid refrigerant flow when the evaporator's thermal load ...
Inrush current, input surge current, or switch-on surge is the maximal instantaneous input current drawn by an electrical device when first turned on. Alternating-current electric motors and transformers may draw several times their normal full-load current when first energized, for a few cycles of the input waveform.
Most of the electricity in an LED becomes heat rather than light – about 70% heat and 30% light. [1] If this heat is not removed, the LEDs run at high temperatures, which not only lowers their efficiency, but also makes the LED less reliable, shortens its lifespan. Thus, thermal management of high power LEDs is a crucial area of the research ...