Ads
related to: cast iron sbc heads porting
Search results
Results From The WOW.Com Content Network
Cylinder head porting refers to the process of modifying the intake and exhaust ports of an internal combustion engine to improve their air flow. Cylinder heads, as manufactured, are usually suboptimal for racing applications due to being designed for maximum durability. Ports can be modified for maximum power, minimum fuel consumption, or a ...
There were a few different versions of the LT1. All feature a cast iron block, with aluminum heads in the Y- and F-bodies, and cast iron heads in the B- and D-bodies. Corvette blocks had four-bolt main caps, while most other blocks were two-bolt main caps. Block castings remained the same between 2 and 4 bolt mains.
In the past when it was called GM-Saginaw Product Company (SPC) a cloverleaf casting symbol mark was cast onto the iron component. [1] [2] The location has been the primary source of engine block and cylinder heads for all of GM's engines, to include Oldsmobile, Pontiac, Cadillac, Chevrolet, Buick and GMC for most of the 20th century.
All engines have cast iron blocks and cylinder heads. The engines are based on the Chevrolet Small-Block engine , and the V6 is formed by the removal of the #3 and #6 cylinders. The V6s share the same 4.4-inch (110 mm) bore spacing and 9.025-inch (229.2 mm) deck height as the V8 engines .
The heads from the Boss 302 became the production heads on the 335-series 351 cu in (6 L) "Cleveland" engines, which used the same bore spacing and head bolt configuration as the small block engines. As the 1980s drew to a close, Ford began the design of a new OHC V8 to replace the venerable small block design.
The cylinder heads for the 400 were the same as those used on the 351C-2V, having the open combustion chamber with smaller 2V sized ports and valves. All 400s were low performance engines that ran on regular fuel and all used a 2-barrel carburetor, a cast-iron intake manifold, and small port 2V cylinder heads.