Search results
Results From The WOW.Com Content Network
L-Jetronic manufactured under license by Japan Electronic Control Systems was fitted to the 1980 Kawasaki Z1000-H1, the world's first production fuel injected motorcycle. Despite physical similarity between L-Jetronic components and those produced under license by other manufacturers, the non-Bosch systems should not be called L-Jetronic, and ...
21.6 L (4.8 imp gal; 5.7 US gal) The Kawasaki GPz1100 B1 and B2 are motorcycles that were manufactured by Kawasaki in 1981 and 1982 respectively. Both models featured a four-cylinder , two-valve air-cooled engine design with a capacity of 1,089 cc.
In the mid-1980s, Lucas developed the 13CU system by revising the Bosch L-Jetronic system and adding an electronic diagnostics capability to comply with California Air Resources Board requirements. The design of the 13CU also deviated from the original L-Jetronic design in that it used a hot-wire air mass sensor rather than the Jetronic's ...
K-Jetronic was a mechanical injection system, using a plunger actuated by the intake manifold pressure which then controlled the fuel flow to the injectors. [55] Also in 1974, Bosch introduced the L-Jetronic system, a pulsed flow system which used an air flow meter to calculate the amount of fuel required. L-Jetronic was widely adopted on ...
By the mid-1980s, JECS were using LH-Jetronic, and the new Bosch hotwire mass airflow meter. The early JECS LH-Jetronic systems were based on a Motorola 6800 architecture, using many Hitachi components. The earliest hotwire meters were still from Germany, but by the end of the 1980s all of the system components (pumps, sensors, injectors, ECU ...
The BMW K75 is a standard motorcycle produced by BMW Motorrad from 1985 to 1995. The three-cylinder BMW K75 was developed alongside the K100, but was introduced a year after the K100 as a marketing strategy.
ML-Motronic appears in 1979. BMW equipped the E32 732i with the Bosch ML-Motronic. This was a L-Jetronic (now in digital technology) with digital ignition control in the same housing. Data was stored in EPROM. ML-Motronic and M-Motronic must be keep apart. There is ML3.2 and M3.2, these a two different things.
The Bosch L-Jetronic system is only a multipoint fuel injection system with a primitive, analogue ECU – it is limited to fuel injection, it does not control anything engine. This is why all L-Jetronic injected engines either have a traditional ignition distributor or a transistorised ignition system, and why L-Jetronic injected engines ...